G2
Phone: 908-788-5550
www.sisweb.com
Micro-Mesh® Cushioned Abrasives
Micro-Mesh® Cushioned Abrasives
C
ushioned abrasives are made in such a manner that
the crystals are held in a resilient matrix as opposed to
a hard resin, which will allow the crystal to recede when
subjected to contact pressure.
In the case of Micro-Mesh products, there is a cloth backing
upon which a Latex film is placed. Then various sizes of silicon
carbide crystals are adhered onto the film.
What is unique about cushioned abrasives is that they do not
give any random deep scratches. Instead, they produce an
extremely uniform scratch pattern over the entire work surface.
Cushioned abrasive products like Micro-Mesh have an extremely
long life since the crystals are not subject to fracture or
overheating. The crystals continue to cut effectively until they
eventually become dull and lose their cutting edge.
An Ultra Fine Polishing Material for:
•
MS & SEM Source Cleaning
•
Polishing MS Probes & Quadrupoles
•
Polishing and Cleaning Metals, Plastics
and Painted Surfaces
•
Polishing Stainless Steel, Copper,
and Aluminum
Use Wet or Dry
Micro-Mesh may be used wet or dry and after you’re done,
it can be washed out and used again. Every sheet has the grit
written
on its reverse side - the higher the grit number, the finer
the cutting action. The variety of grits permit the restoration of
most surfaces to a mirror finish.
Micro-Mesh produces finishes 10 times to 20 times finer
than ordinary sandpaper. Applications in our shop at SIS include
cleaning and polishing sources, probes, filaments, and quadru-
pole rods. The finer meshes are ideal for cleaning and trimming
source slits. By beginning with the coarser grits (1500-2400) and
successively polishing with the finer grits (3200-12000) we have
produced mirror finishes on MS direct probes.
The finer grits,
(Kit #MMK-3
Part #MMK3—Click for details
Current Price: $19.99
Unit of Measure:
EA
Est. Ship Weight=0.2 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
), are ideal for cleaning mass spec sources such as
the Agilent MSD and 5973/75 Sources.
These fine grits clean
and polish the sources to a mirror finish with minimal removal of
metal surface material.
Micro-Mesh Polishing / File Boards
T
hese polishing boards are ideal for getting into tight
spaces, cleaning quadrupole rods, or for use in any
other place where a stiff backing is preferable (They
even make great emory boards!). They are used just like the
Micro-Mesh sheets, starting with the coarsest area of the board
and working to the finest area.
Micro-Mesh® Polishing Kits
Micro-Mesh Sheets - 4" Wide x 6"Long
Part No.
Description
MM1500
Part #MM1500—Click for details
Current Price: $4.75
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=152
4" x 6" sheet, 1500 Grit
MM1800
Part #MM1800—Click for details
Current Price: $4.75
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=44
4" x 6" sheet, 1800 Grit
MM2400
Part #MM2400—Click for details
Current Price: $4.75
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=42
4" x 6" sheet, 2400 Grit
MM3200
Part #MM3200—Click for details
Current Price: $4.73
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=95
4" x 6" sheet, 3200 Grit
MM3600
Part #MM3600—Click for details
Current Price: $4.75
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=131
4" x 6" sheet, 3600 Grit
MM4000
Part #MM4000—Click for details
Current Price: $4.73
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=73
4" x 6" sheet, 4000 Grit
MM6000
Part #MM6000—Click for details
Current Price: $4.75
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=144
4" x 6" sheet, 6000 Grit
MM8000
Part #MM8000—Click for details
Current Price: $4.75
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=41
4" x 6" sheet, 8000 Grit
MM12000
Part #MM12000—Click for details
Current Price: $4.75
Unit of Measure:
EA
Est. Ship Weight=0.02 lbs
Quantity in Stock=130
4" x 6" sheet, 12000 Grit
MMB
Part #MMB—Click for details
Current Price: $3.00
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Polishing/File board
Micro-Mesh Sheets - 3" Wide x 6"Long
Part No.
Description
MM15003
Part #MM15003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=62
3" x 6" sheet, 1500 Grit
MM18003
Part #MM18003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=84
3" x 6" sheet, 1800 Grit
MM24003
Part #MM24003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=94
3" x 6" sheet, 2400 Grit
MM32003
Part #MM32003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=45
3" x 6" sheet, 3200 Grit
MM36003
Part #MM36003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=52
3" x 6" sheet, 3600 Grit
MM40003
Part #MM40003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=148
3" x 6" sheet, 4000 Grit
MM60003
Part #MM60003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=72
3" x 6" sheet, 6000 Grit
MM80003
Part #MM80003—Click for details
Current Price: $2.99
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=426
3" x 6" sheet, 8000 Grit
MM120003
Part #MM120003—Click for details
Current Price: $3.14
(100 or more: 20% off; 200 or more: 35% off)
Unit of Measure:
EA
Est. Ship Weight=0.015 lbs
Quantity in Stock=386
3" x 6" sheet, 12000 Grit
Part No.
Description
MMK1
Part #MMK1—Click for details
Current Price: $46.99
Unit of Measure:
EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Kit of all 9 grits and one polishing board
MMK2
Part #MMK2—Click for details
Current Price: $39.99
Unit of Measure:
EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
8 Finer grits (1800 - 12000)
MMK3
Part #MMK3—Click for details
Current Price: $19.99
Unit of Measure:
EA
Est. Ship Weight=0.2 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
4 finest grits (4000 - 12000)
MMK4
Part #MMK4—Click for details
Current Price: $18.92
Unit of Measure:
PK
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
4 coarsest grits (1500 - 3200)
MMK5
Part #MMK5—Click for details
Current Price: $143.75
Unit of Measure:
EA
Est. Ship Weight=0.2 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Kit of all 9 grits, 12" x 12" sheets
MMK6
Part #MMK6—Click for details
Current Price: $105.75
Unit of Measure:
EA
Est. Ship Weight=0.2 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Kit of all 9 grits, 6" x 12" sheets
MMK7
Part #MMK7—Click for details
Current Price: $26.81
Unit of Measure:
PK
Est. Ship Weight=0.2 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Kit of all 9 grits, 3" x 6" sheets
- Table of Contents
(Print Catalog)Table of Contents of the Scientific Instrument Services general catalog volume 36. - Print Catalog G. General Laboratory & Cleaning Supplies SIS Vol. 36 catalog Section G - General Laboratory and Cleaning supplies.
- Print Catalog G. General Laboratory & Cleaning Supplies SIS Vol. 36 catalog Section G - General Laboratory and Cleaning supplies.
- Micro-Mesh® Cushioned Abrasives
(Catalog G2) - Micro-Mesh® Cushioned Abrasives
(Catalog G3)