|
Made in USA
See also the following section of our catalog:
|
Micro-Mesh Regular Soft Touch PadsMicro-Mesh is available in three grades (Regular - MX - AO), in a wide selection of Grits and in a wide variety of formats including sheets (for convenient use), rolls (for higher volume users), discs (for power tools), belts, tapes and others listed below. Micro-Mesh Regular Micro-Mesh Regular (silicone carbide grit with standard backing) - The
standard grade of Micro-Mesh used for the majority of operations on plastics,
paints, wood and most metals and polymers. It is used to produce a
uniformly smooth surface and bring the surface to a high gloss finish.
Available in grades 1500 to 12000 (30 to 2 microns), and in pad sizes of 2" x 2"
and 3" x 4".
Micro-Mesh may cost more than ordinary sandpaper, but it produces finishes 10 to 20 times finer. Applications in our instrument shops at SIS include cleaning and polishing stainless steel instrument parts, mass spectrometer probe rod polishing, and metal finishing in our machine shop. Micro-Mesh can be used wet or dry. By beginning with the coarser grits (1500 -2400) and successfully polishing with the finer grits (3200 - 12000) we have produced mirror finishes on probe shafts and stainless steel electronic reflectors. Micro-Mesh Regular Soft Touch Pad Sizes AvailableBack to Micro-Mesh Product Selector Page Micro-Mesh Regular Soft Touch Pads 2" x 2"
Micro-Mesh Regular Soft Touch Pads 3" x 4"
© 1996-2008 Scientific Instrument Services, Inc.
[Trademarks]
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||