The Oxiclear Gas Purifiers are oxygen absorbing gas purifiers with high efficiency and low resistance to gas flow. Oxiclear Gas Purifiers are primarily designed for applications involving gas chromatography, glove boxes and anaerobic experiments. They remove oxygen and trace amounts of water and organics from inert carrier gases such as nitrogen, helium and argon. Oxiclear purifiers are efficient to less than 50 ppb when the incoming oxygen concentration is 21% or less. Furthermore, all models can withstand pressures in excess of 125 psi and temperatures up to 100 °C.
A spring clip is available for convenience in holding “inline” OxiClear™ or LabClear™ units. This useful item mounts easily on your bench or cabinet, and holds your “inline” filter or purifier firmly in place. It may also be used for conveniently locating spare units.
Designed for mounting all in-line filters and all purifiers through 500 R1 sizes, except DGP-R2 and Indicating Oxygen Trap.
Designed to hold DGP-R2 and Indicating Oxygen Trap.
|SC1A||for mounting all in-line filters and all purifiers through 500 R1 sizes||$14.75|
|SC2A||for DGP-R2 and Indicating Oxygen Trap||$14.75|
|* Standard lead-time for non-stock items is approximately two weeks depending on the item.|
|Ordering information. International (non-US) prices available through your local dealer.|