SIS Catalog Online >> Page Number: [ previous page next page ]
[Table of Contents > Mass Spectrometer Instrument Supplies | Index] Zoom: [ Printable PDF]
Ordering: Click part number to add to shipping cart. Contact your Local Dealer for non-US prices.
www.sisweb.com/catalog/08/B28
Thermo TRACE
TM
Scientific Instrument Services, Inc.
TM
Phone: 908-788-5550
T
he AutoProbe integrates a CTC liquid autosampler with
an automated Direct Exposure Probe (DEP) for the auto-
mated and unattended injection of dissolved or suspend-
ed samples directly into the Thermo DSQ, DSQ II, Polaris Q &
GCQ MS source for direct MS analysis. Using this technique, sam-
ples can be analyzed in about three minutes without any chro-
matographic separation. The AutoProbe is fully integrated with the
Thermo XcaliburTM software, including system setup, methods
setup, system operation and data storage.
The DEP (or DCI) technique is used for the analysis of samples
that are not volatile enough to be introduced into the mass spec-
trometer via a GC and therefore must be directly introduced into the
mass spectrometer source. The DEP technique is normally used
for single component samples since minimal separation of samples
is possible with this technique and samples with two or more com-
ponents are difficult to interpret. Alternatively DEP sample analysis
is performed utilizing CI (Chemical Ionization) mass spectrometer
techniques, which produce less fragmentation in the mass spec-
trometer. Due to the increased abundance of a molecular ion and
reduced fragmentation in the CI technique, it is possible to analyze
and interpret mixtures of two or more compounds in a sample.
Part No. Thermo No.
Description
VGF5
C030A
SIS VG MD800
filament
FILREP
Filament Repair
Filament for Thermo
TRACE
S
cientific Instrument Services
TM
manu-
factures replacements for the VG
TRACETM filaments which are similar
in design to the original. This new design is a
direct retrofit and incorporates a glass frit to
hold the posts in place.
Part No.
Thermo No.
Description
VGI33
C046M
Alumina Ceramic Insulator
Ceramic Insulators
Scientific Instrument Services can sup-
ply replacement ceramic insulators for the
TRACETM Source Lens. All insulators are
constructed from high purity alumina ceram-
ic.
AutoProbe
TM
NEW - Automated Direct Exposure
Probe for Thermo Polaris Q,
DSQ, DSQ II, and
GCQ MS Systems
Syringe Needle Guide
Syringe Needle
Platinum DEP Coil
DEP Probe Tip
Part No.
Description
AutoProbe System
AutoProbe DCI Filament
TRACETM is a registered trademark of Thermo Fisher Scientific Corp
For More Details See Pages A57-A60
or
Visit the SIS Web Site
B28
tip...
Page Number: [ previous page next page ]
Related information may be found on the following pages of our web site:
PageParts
Finnigan, Varian, Telecyne Ion Trap FilamentsFILREP
Ceramic Insulators for VG Fisons MSVGI33
JEOL Filament and Heater RepairFILREP
Finnigan MAT 90/900 Source HeaterFILREP
Finnigan Iont Trap Filament Repair - Old StyleFILREP
Hewlett Packard 5971 Filament RepairFILREP
VG and Vestec MS FilamentsVGF5
VG DCI Probe Tip RepairFILREP
Nicolet, Balzers, and Other Filament Repair at SISFILREP
Shimadzu Filament Repair at SISFILREP
VGI DCI Probe Tip - new designFILREP
Nermag Filament Repair at SISFILREP
Extrel Filament Repair at SISFILREP
Agilent (Hewlett Packard) Filament Repair at SISFILREP
VG Fisons Filament Repair ar SISFILREP
Dupont/CEC Filament Repair Services at SISFILREP
Finnigan DEP FilamentsFILREP
LKB Filament Repair at SISFILREP
Kratos Filament Repair at SISFILREP
Veeco, Phillips, Nicolet Filaments Repaired at SISFILREP
Vestec Discharge Electrode RepairFILREP
Index with links to all Filament Repairs at SISFILREP
JEOL Filament Repair at SISFILREP
Perkin Elmer/Hitachi Filament Repair at SISFILREP
Finnigan Filaments Repaired by SISFILREP
VG DCI Redesigned Filament Tip and coils tipsFILREP
Finnigan 4000 Filament New and RepairFILREP
Contacting our Customer Service Department--comments, questions, or anything can't find?
Call/e-mail/FAX us, or type your comments below.
Name/organization:
Email: Phone/fax:
Regular business hours are 8:00 AM to 5:30 PM EST, M-F.
E-mail replies are normally expected within one business day.
PHONE: (908)788-5550;   FAX: (908)806-6631;   E-MAIL: contact us WEB: www.sisweb.com
ADDRESS: Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551.
© 1996-2008 Scientific Instrument Services, Inc. [Trademarks]