B17
Thermo
*
Repair Services by S.I.S.
TM
Scientific Instrument Services, Inc.
TM
FAX: 908-806-6631
www.sisweb.com/catalog/08/B17
Thermo MAT Vacuum Flange Repairs
A
variety of repairs and modifications can be per-
formed on Thermo MAT mass spectrometer flanges.
The repair shops of S.I.S. have a wide range of
equipment which enable us to perform custom machining, weld-
ing, and leak checking of mass spectrometer parts. Our services
for vacuum flanges include replacing broken, damaged, or leak-
ing electrical feedthroughs, adding additional feedthroughs, gas
Lines, or fittings to flanges, repairing damaged knife edges, and
other custom modifications and additions. We also have the
capabilities to custom manufacture flanges to your specifica-
tions. For repairs, modifications, or manufacture of flanges not
listed below, send us a description of your requirements along
with a sketch for a quotation. See the beginning of this catalog
for additional information on our shop manufacturing and repair
facilities.
Transfer Line Repair
T
ransfer lines for the Thermo mass spectrometers can
be repaired or modified by S.I.S. Repair of broken,
damaged or clogged parts can be effected to improve
the performance of the assembly according to your require-
ments. All repaired assemblies are helium leak tested to assure
vacuum tight seals and welds on all parts of the movable trans-
fer line assembly.
Custom modifications or redesign of the movable transfer
line is available from S.I.S.to suit your particular requirements.
Modifications can include, (1) replacement of arms or fittings, (2)
sealing off of arms or fittings, (3) changing dimensions or rela-
tive position of parts, (4) extension of the center fitting and, (5)
custom mounting brackets. For a quotation, call S.I.S. or send a
sketch of your requirements.
Thermo GC Injection Port Repair
The injection port assembly for the Thermo 5100 GC and
9610 GC, as well as other model GC injection ports, can be
repaired. S.I.S. will reweld all broken or leaking stainless steel
capillary lines or replace them with new 1/16" stainless steel
capillary tubing if required. After repair all assemblies are helium
leak checked. Call SIS for more information on your particular
repair.
Mass Spectrometer Probe Repair
S
cientific Instrument Services
TM
has the facilities equip-
ment, and staff to repair, modify or manufacture most
direct exposure probes for mass spectrometers. Our
equipment includes Tungsten Inert Gas (TIG) welding for preci-
sion vacuum tight welds of the stainless steel parts. Our
machine shop also contains lathes, milling machines, drill press-
es, coil winders, cut-off saws, and other machine shop tools and
equipment to enable us to manufacture and repair a wide vari-
ety of mass spec probes. A description of our facilities is
expanded upon in the front section of this catalog. As a part of
all repairs or manufacture of mass spec probes, we helium-leak
check all assemblies on a helium leak tester to assure good vac-
uum seals of all joints and welds. Call for more information on
the various Thermo probes routinely repaired by SIS.
Thermo Jet Separator Repair
All models of jet separators can be repaired if the side arms
become damaged or broken. Jets to be repaired must have at
least 5/8" glass arm extending past the main body in order to be
repaired. Jets repaired with less than 5/8" cannot be guaran-
teed. We can also clean most clogged jets. S.I.S. assumes no
responsibility for jets damaged during the unclogging procedure.
Part No.
Description
Repair One Jet Separator Arm
Repair Two Jet Separator Arms
Repair Three Jet Separator Arms
Clean Jet Separator-price per Jet
Incos
TM
50B Transfer Line Repair
The long transfer lines between the GC and the Incos 50B
mass spectrometers can be repaired by S.I.S. The heater, ther-
mocouple and fittings can be repaired or replaced. Please send
in your transfer line for evaluation. We will examine it quickly,
call you with a price for repair and then in a minimum turnaround
time repair it for you.
OWA/3000 Ion Volume Repair
Part No.
Description
Price / pkg
Ion Volume Repair
& Cleaning
*When "Thermo" is indicated, it is intended to imply "Thermo Fisher Scientific Corp"
tip...
