SIS AP2000 AutoProbe - Specifications and Requirements
New Automated Direct Insertion Probe for the
Finnigan PolarisQ and TRACE DSQ from Thermo Electron Corp.
AutoProbe System Components
The AutoProbe System as shipped consists of the following components.
A quantity of one of each of the following is included unless otherwise noted below.
- AutoProbe Console with Adjustable Base
- CTC PAL AutoSampler
- Software
- SIS AutoProbe System Software Module CD
- PAL Driver for Xcalibur with Cycle Composer CD
- Edwards Vacuum Pump
- MS-Probe Interface Tube
- AutoProbe Accessories
- DEP Filament (2 included)
- Source Position Calibration Tip (1 included)
- Probe Seals (1 spare set included)
- Isolation Valve Seal Set (1 spare set included)
- One Sample Tray and one Pump Tray
- Compressed Air Gas Line - 1/8" O.D. x 20 feet flexible nylon air line
- AutoProbe Cables
- Serial Cable - PC to AutoProbe
- Serial Cable - PC to CTC PAL Autosampler
- Remote Start Cable - AutoProbe to MS
- AutoProbe IO Cable - AutoProbe to CTC PAL AutoSampler
- CTC Low Voltage Power Cord
- Main Power Cord for AutoProbe
Accessory Tools
- Allen Wrenches
- Probe Seal Removal Tool
Manuals
- SIS AutoProbe Manual
- CTC PAL Autosampler Manual
Optional Accessories - (must be purchased separately)
- PC Serial Port
Recommended Spare Parts (must be purchased separately)
- DEP Probe Filaments
Probe Seals
Isolation Valve Seal Set
AutoProbe System Specifications
Voltages
Fuses
Compressed Air
Mass Spectrometer System Requirements
-
Finnigan PolarisQ or TRACE DSQ MS System from Thermo Electron Corp.
A Windows NT-based operating system (tested under NT4, 2000, and XP).
- Finnigan Xcalibur OpenAccess is optional (tested under 1.1 and 1.3)
Finnigan Xcalibur Version 1.3 or above software (tested up to 1.4)
- PolarisQ or TRACE DSQ MS Source with Ion Volumes modified for the AutoProbe
(see parts section E of the manual)
Dimensions
Weight
For additional details click onto the detailed descriptive
material on the AutoDesorb system below. The application
notes below demonstrate the operation of the AutoProbe for the
analysis of samples. For additional pricing and ordering
information, contact John Manura at
Scientific Instrument Services, or call (908) 788-5550 ext:
800.
AutoProbe Details
- AutoProbe General Description
- AutoProbe Console
Description
- AutoProbe Software Description
- AutoProbe Specifications
and Requirements
- AutoProbe Brochure (PDF)
Articles and Application Notes
- 87. Design and Development of an Automated Direct Probe for a Mass
Spectrometer
- 89. Quantitation of Organics
via a Mass Spectrometer Automated Direct Probe
- 90. An Automated MS Direct Probe for use in an Open Access
Environment
- 91. AutoProbe
DEP Probe Tip Temperatures
© 1996-2008 Scientific Instrument Services, Inc.
[Trademarks]
|