Price: 0
Product ID : HT4500
HT7000 Options=Heater Assembly for Thermo TSQ-70 HT4500 Options=4500/4600/TSQ Heater Assembly, #40005-60270
Description
The source heater for the Thermo 4500/4600, Thermo #40005-60270, includes 4 cartridge heaters, ceramic insulators, leads and connectors.
SIS also repairs these heater assemblies - Part # REP46.
Individual cartridges, SC181, are also available for those who want to repair these heaters themselves.
Thermo MS Filaments Replacement filaments for your Thermo mass spectrometer
Mass Spectrometry - Thermo/Finnigan SIS supplies new parts or repairs old parts on your Thermo/Finnigan instrument.
Thermo/Finnigan MAT Source and Transfer Line Heater Cartridges Heater cartridge No. SC2515 is used in the Finnigan 4000 source.
#REP46 4500/4600/TSQ Heater Repair
Thermo TSQ®70/700 PRT Temperature sensor for your TSQ mass spec.
Thermo 4500 PRT This EI/CI Source Temperature Sensor (PRT2) includes the 100 ohm platinum resistance thermometer, leads, ceramic insulator, and connectors.
Spun Fiberglass Cleaning Brushes Fiberglass brushes are manufactured from spun glass in two grades of material - coarse and fine.
Ion Gauge Tubes, Bayard-Alpert Type Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
Thermo/Finnigan Source and Transfer Line Heaters Heater cartridge No. SC2515 is used in the Finnigan 4000 source.
Thermo/Finnigan TSQ®70, 700 Source Heater The heater source for the Finnigan TSQ70, 700 includes 4 cartridge
heaters, ceramic insulators, leads and connectors.
Inland 45 Mechanical Pump Oil Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
Purge and Trap Stainless Steel Purge Heads The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Thermal Desorption Sample Loader This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
Short Path Thermal Desorption Accessories Supply Kit When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
Seals for SIS Thermal Desorption Tubes Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.




