Agilent MS Parts
B8
Phone: 908-788-5550
www.sisweb.com
D
irect Probe sample analysis can be accomplished on
the Agilent 5973, 5975 &5977 MSD with the new Direct
Probe Inlet System from Scientific Instrument Services.
The probe inlet mounts onto the GC/MS transfer line port and uses
an indexed probe introduction guide to permit the direct insertion
and removal of the probe into the MSD source without venting the
MSD or scoring the probe rod. The probe can be either heated bal-
listically at ramp rates in excess of 500 degrees per minute or can
be temperature programmed with up to 25 ramp rate levels. The
probe temperatures, ramp rates, hold times, start and stop are all
PC controlled and fully integrated with the Agilent ChemStation™
software. This permits the storage of the probe analysis parame-
ters in the sample data files and the method files.
Direct Insertion Probe for the Agilent 5973, 5973N & 5975/5977 MSD
System Features:
•
Easy to install - mounts on the GC/MS Inlet Port
•
PC window for the control of temperatures
and ramp rates
•
Ballistic ramp rate >500 degrees per minute
•
Up to 25 levels of programmable
temperature ramping
•
Probe PC control software fully integrated
with the Agilent ChemStation™ software
•
Can be used with either the turbo pump or
diffusion pump version of 5973 & 5975/5977*
*cannot be used with exactive source
Complete Direct Probe System mounted on the
Agilent 5973 MSD
Part No.
Description
HPP7
Part #HPP7—Click for details
DISCONTINUED
Unit of Measure:
EA
Est. Ship Weight=62 lbs
Probe Inlet System
S12A
Part #S12A—Click for details
Current Price: $120.00
Unit of Measure:
PK
Est. Ship Weight=0.2 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Flared Sample Vials, 100
S12C
Part #S12C—Click for details
Current Price: $575.00
Unit of Measure:
PK
Est. Ship Weight=0.25 lbs
Quantity in Stock=2
Flared Sample Vials, 500
S12B
Part #S12B—Click for details
Current Price: $1091.00
Unit of Measure:
PK
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Flared Sample Vials, 1000
HPP7007
Part #HPP7007—Click for details
Current Price: $79.00
Unit of Measure:
PK
Est. Ship Weight=0.25 lbs
Quantity in Stock=27
Replacement Inlet Seal Set
Ordering Information
New Agilent 5971 Transfer Line Tip
The transfer line tip for the Agilent 5971 MSD has been redesigned to permit the effluent from the end of
the capillary column to purge directly into the MSD source, unlike the original gold plated transfer
line tip
in which the effluent purged inside this fitting and was diverted through side vents. This new design elim-
inates any inlet metal contact with the sample. The capillary column protrudes slightly through the end of
the tip directly into the source. This new design should result in higher sensitivity for compounds which
are sensitive to any metal contact.
Part No.
Agilent No.
Description
HP99
Part #HP99—Click for details
Current Price: $115.00
Unit of Measure:
EA
Est. Ship Weight=0.01 lbs
Quantity in Stock=3
05971-20305
Agilent 5971 Transfer Line Tip
Part No.
Agilent No.
Description
SIS20136
Part #SIS20136—Click for details
Current Price: $0.00
Unit of Measure:
EA
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
05990-20136
Agilent 5970 Repeller Insulator
Vespel® Repeller Insulator
Vespel Insulator used in the 5970 Repeller.
Baseplate O-Ring for 5973/5975
Brown viton O-ring is a direct replacement for the Agilent O-ring
(Part #0905-1242)
Part No.
Description
V1075X18
Part #V1075X18—Click for details
Current Price: $47.30
Unit of Measure:
EA
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
10.75" x 1/8" Viton
base plate seal
Agilent In-Line Connector
Stainless steel connector for connecting
electrical leads (Agilent#05930-20441).
Brass Nut
Brass nut is nickel plated for use on the
MSD interface. Available in packages
of 5 nuts.
Part No.
Agilent No.
Description
103406
Part #103406—Click for details
Current Price: $24.20
Unit of Measure:
PK
Est. Ship Weight=0.01 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
05986-20066
Brass Nut
Part No.
Agilent No.
Description
SC-1
Part #SC1—Click for details
Current Price: $11.00
(10 or more: 5% off; 50 or more: 10% off)
Unit of Measure:
EA
Est. Ship Weight=0.01 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
05930-20441
.128" x .057" x .305"
Additional information, see page A48
- Table of Contents
(Print Catalog)Table of Contents of the Scientific Instrument Services general catalog volume 36. - Print Catalog B. Supplies for Specific Mass Spectrometers SIS Vol. 36 catalog Section B - Supplies for specific mass spectrometers.
- Agilent MS Parts
(Catalog B7) - Agilent MS Parts
(Catalog B8) - Agilent MS Parts
(Catalog B9)