Product ID : 979401
979401 Tenax-GR[TM], Mesh=60/80, Size (g)=5.0
More details on associated web pages:
- Tenax®-GR Adsorbent Resin for Trapping Volatiles The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.
- Adsorbent Resin for Trapping Volatiles
Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
For cleaning inside Silco Coated desorption tubes
Fittings to connect our 1/4" O.D. GLT desorption tubes to your particular application.
The LFS-113 provides for constant flows between 5 to 200 mL/min at variable back pressures up to 25" of H2O for use in pumping air or gas samples through the S.I.S. Short Path Thermal Desorption Sampling Tubes.
Stronger filament posts for better filament tension and harder filament ceramic body for accurate alignment.