908-788-5550

Cleaning Brushes

Cleaning Brushes
Hover over image to zoom
Price: 8
Product ID : SMS04016003
SMS04016003 Size=3 mm Stainless Steel Cleaning Brush SMS04016004 Size=4 mm Stainless Steel Cleaning Brush

Description

These stainless steel brushes are designed to clean the S.I.S. Silco Coated desorption tubes when samples fuse to the inner wall. Two sizes (3 mm & 4 mm) are available to clean both sizes of desorption tubes.

For cleaning inside desorption tubes

  • S.S. construction with 6" long handle
  • 2 - diameter brushes available - 3mm or 4mm
  • Use to thoroughly clean particles inside desorption tubes

Charred residues can be easily removed from desorption tubes with a small wire brush.

Popular Items also Purchased
  • Small Sample SpatulaSmall Sample Spatula
    For loading small samples into Silco Coated desorption tubes
  • Short Path Thermal Desorption TubesShort Path Thermal Desorption Tubes
    After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
  • Aluminum Funnel for Loading Packings into Desorption TubesAluminum Funnel for Loading Packings into Desorption Tubes
    SPTD Accessory
  • Short Path Thermal Desorption Accessories Supply KitShort Path Thermal Desorption Accessories Supply Kit
    When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
  • Purge and Trap Stainless Steel Purge HeadsPurge and Trap Stainless Steel Purge Heads
    The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
  • Seals for SIS Thermal Desorption TubesSeals for SIS Thermal Desorption Tubes
    Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
  • Thermal Desorption Sample LoaderThermal Desorption Sample Loader
    This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
  • Wheaton Purge and Trap SystemWheaton Purge and Trap System
    The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
  • Needles for the Short Path Thermal Desorption SystemNeedles for the Short Path Thermal Desorption System
    In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
  • SIS Purge and Trap SystemSIS Purge and Trap System
    The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.