Short Path Thermal Desorption Ordering Information

When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user. A minimum system should include the Thermal Desorption System (Part #785000) and an installation kit for your make and model of gas chromatograph. We also recommend the starter options in most cases. You may require additional accessories depending on your application. For example you may require a Purge and Trap System for analyzing water samples or an air pump for air sampling. Installation and training is recommended at the prices listed below (training is available at S.I.S. at no charge).

• Minimum System - A minimum System should consist of the following:

  Part # 785000	Complete Short Path Thermal Desorption System, Model TD5
  Part # 7852__	Installation Kit, select one of the 6 available Kits

• Recommended Starter Options:

  Part # 781051A	Desorption Tube Conditioning System - Necessary to assure clean desorption tubes and needles
  Part # 784010	Accessories Supplies Kit - A kit of needles, tubes and seals to get you started
  Part # 9_____	Micro Cryo-Tap Accessory - for Cryo-focusing volatiles at the front of the GC column

• Optional Accessories - The following optional accessories are available:
  • Desorption Tube Conditioning Oven
  • Sample Collection Oven
  • Other Operating Accessories
  • Purge and Trap System
  • Air Sampling Pump
  • Micro Cryo-Trap Accessory
  • Adsorbent Resins

Model TD5 Short Path Thermal Desorption System

UOM=EA
Part No.	Description	est wt.	Quantity In Stock	Price	Quantity to order
785000	Complete Model TD5 Short Path Thermal Desorption System Includes ThermalDesorber, Electronics Console, desorption pliers, PTFE tubing, one desorptiontube, needle and seal	70	0(#)	$11000.00
782100	On Site Training and Installation of the SPTD System. Includes 1.5 days on site, travel and expenses. (all areas except New Jersey)	0	CALL(#)	$3500.00
782110	On Site Training and Installation, for New Jersey only	0	CALL(#)	$1500.00
(#) Standard lead-time for out-of-stock items is approximately two weeks.
Ordering information. International (non-US) prices available through your local dealer.

Installation Kits - Select one (1) of the following - One is required for each TD5 system

UOM=EA
Part No.	Description	est wt.	Quantity In Stock	Price	Quantity to order
785200	Varian 3400 GC Installation Kit Includes GC Carrier Gas valve, remote start cable, desorption tubepliers, PTFE tubing, one desorption tube, needle and seal.	10	0(#)	$368.00
785210	Hewlett Packard 5890 Series I GC Installation Kit. Includes GC carrier gas valve, remote start cable,pliers, desorption tube, needle and seal	10	0(#)	$498.00
785220	Hewlett Packard 5890 Series II GC Installation Kit, No EPC. Includes GC carrier gas valve, remotestart cable, pliers, desorption tube, needle and seal	10	0(#)	$498.00
785230	Hewlett Packard 5890 Series II GC Installation Kit, EPC. Includes GC carrier gas valve, remote startcable, pliers, desorption tube, needle and seal	10	0(#)	$780.00
785231	Hewlett Packard 6890 ;GC Installation Kit. Includes GC carrier gas valve, remote start cable,pliers, desorption tube, needle and seal	10	0(#)	$787.00
785240	Perkin Elmer 9000 GC Installation Kit. Includes GC carrier gas valve, remote start cable,pliers, desorption tube, needle and seal	10	0(#)	$404.00
785250	Shimadzu 17A GC Installation Kit. Includes GC carrier gas valve, remote start cable,pliers, desorption tube, needle and seal	10	0(#)	$787.00
785260	Finnigan GC Installation Kit.	10	0(#)	$866.00
785261	TG T2000 GC Installation Kit.	10	0(#)	$750.00
785265	CE 8000 GC Installation Kit.	10	0(#)	$882.00
785270	Varian GC Installation Kit.	10	0(#)	$787.00
(#) Standard lead-time for out-of-stock items is approximately two weeks.
Ordering information. International (non-US) prices available through your local dealer.

Additional Installation Kits are available for most makes and models and GCs. Call for pricing and availability.

Accessories Supply Kit

This kit contains an assortment of the most commonly used supplies needed to operate the Short Path Thermal Desorption System. It provides basic supplies for the operator to begin the operation of the desorber system and therafter select the type of supplies which will best serve the user in his particular application. Includes 4 empty desorption tubes, 4 desorption tubes packed and conditioned with Tenax® TA, 4 side hole needles, 2 sets of seals and one package of PTFE washers.

Kit Contents
Part No.  Quantity        Description
781005       2        GLT Tubes, 3.0 mm I.D., empty.
781002       2        GLT Tubes, 4.0 mm I.D., empty.
781093-50    2        GLT Tube, 3.0mm ID with 50mg Tenax TA
781093-100   2        GLT Tube, 4.0mm ID with 100mg Tenax TA
781052       2        Side Hole Needle on Cap 50mm long
781053       2        Side Hole Needle on Cap 35mm long
781015       1        Graphite Top Seal
781016       2        Graphite Needle Seal
781017       1        Graphite Vespel Top Seal
781018       2        Graphite Vespel Needle Seal
781004   pkg. of 10   PTFE Washers
781040   pkg. of 10   Label Tags

Part No.	Description	UOM	est wt.	Quantity In Stock	Price	Quantity to order
784010	Accessory Supplies Kit	EA	3	0(#)	$520.00
(#) Standard lead-time for out-of-stock items is approximately two weeks.
Ordering information. International (non-US) prices available through your local dealer.

Contacting our Customer Service Department--comments, questions, or anything can't find?

Call, e-mail, FAX, or type your comments below:

Contact details (optional, but required for us to reply or quote):

Name:		Organization/Country:
Email:		Phone/fax:

Regular business hours - 8:00 AM to 5:30 PM EST, M-F. E-mail replies normally expected within one business day.

PHONE: (908)788-5550;   FAX: (908)806-6631;   E-MAIL:

WEB: www.sisweb.com
ADDRESS: Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551.