908-788-5550

Desorption Tube Fittings

Desorption Tube Fittings
Hover over image to zoom

Description

The following list of fittings will adapt our 1/4" O.D. GLT desorption tubes for your particular application.

The GLT desorption tubes are 1/4" O.D. and have a thread size of 1/4" x 48 threads per inch. PTFE seals (781004 ) are normally used at the base of the thread to ensure a seal.

Part No. Description Picture Quantity
In Stock
Price
EA
Order
781011 SS Desorption to 1/4in Tube Connector thumbnail 27$44.00
Qty
781010 S.S. Desorption Tube Hose Connector thumbnail 1$44.00
Qty
781029 S.S. Desorption Tube Union thumbnail 39$44.00
Qty
781060 Dual Desorption Tube to 1/4in Tube Connector thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $360.00
Qty
781061 Dual Desorption Tube to Hose Connector thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $360.00
Qty
781062 Dual Desorption Tube to Male Desorption Thread thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $360.00
Qty
781012 SS Desorption Tube to 1/8 in Swagelok Connector thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $64.00
Qty
781019 SS Desorption Tube to 1/4in Swagelok Connector thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $64.00
Qty
782074 SS Desorption Tube to 0.25in Swagelok Connector thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $64.00
Qty
782076 SS Desorption Tube to 0.25in Swagelok Connector with 1/16in side purge port thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $178.00
Qty
782072 SS Desorption Tube to 0.5in Swagelok Connector thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $95.00
Qty
782075 SS Desorption Tube to 0.5in Swagelok Connector with 1/16in side purge port thumbnail 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. $173.00
Qty
Popular Items also Purchased
  • Short Path Thermal Desorption Accessories Supply KitShort Path Thermal Desorption Accessories Supply Kit
    When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
  • Short Path Thermal Desorption TubesShort Path Thermal Desorption Tubes
    After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
  • Purge and Trap Stainless Steel Purge HeadsPurge and Trap Stainless Steel Purge Heads
    The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
  • Seals for SIS Thermal Desorption TubesSeals for SIS Thermal Desorption Tubes
    Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
  • Thermal Desorption Sample LoaderThermal Desorption Sample Loader
    This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
  • Wheaton Purge and Trap SystemWheaton Purge and Trap System
    The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
  • Thermal Desorption Conditioning Oven - 6 TubeThermal Desorption Conditioning Oven - 6 Tube
    The Desorption Tube Conditioning System is used for the flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.
  • Thermal Desorption Sample Collection SystemThermal Desorption Sample Collection System
    This Sample Collection System permits the purging of volatiles and semi-volatile components present in solid materials and their trapping on Desorption Tubes packed with an adsorbent resin for subsequent analysis by desorption utilizing the Short Path Thermal Desorption System.
  • SIS Purge and Trap SystemSIS Purge and Trap System
    The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.
  • 24 Tube Conditioning Oven for Thermal Desorption Tubes24 Tube Conditioning Oven for Thermal Desorption Tubes
    This 24 tube conditioning oven is used for batch flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.
  • Extraction Cell for Papers, Polymers & Food ContainersExtraction Cell for Papers, Polymers & Food Containers
    The Extraction Cell system consists of two stainless steel plates which are separated by an inter-changeable PTFE insert.
  • Needles for the Short Path Thermal Desorption SystemNeedles for the Short Path Thermal Desorption System
    In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
  • Personal Air Sampling PumpPersonal Air Sampling Pump
    The LFS-113 provides for constant flows between 5 to 200 mL/min at variable back pressures up to 25" of H2O for use in pumping air or gas samples through the S.I.S. Short Path Thermal Desorption Sampling Tubes.