Product ID : 86103091
86103091 Sparging Needle, pkg of=2, Length (cm)=22.5, OD (mm)=0.50, ID (mm)=0.12
More details on associated web page:
- Stainless Steel Sparging Needles for Sample Purging System A variety of lengths of the stainless steel sparging needles are available for the S.I.S. Purge & Trap system.
The stainless steel metal frit spargers have been designed for use with the S.I.S. purge and trap system.
Vespel® ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns.
All tubes are constructed from borosilicate glass with 0.5" O.D. tube ends for mating with standard 1/2" fittings.
A variety of lengths of the stainless steel sparging needles are available for the S.I.S. Purge & Trap system.
The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
Fittings to connect our 1/4" O.D. GLT desorption tubes to your particular application.
The Extraction Cell system consists of two stainless steel plates which are separated by an inter-changeable PTFE insert.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
These new Low Dead Volume Injection Port Liners have been specifically designed for use with the Scientific Instrument Services Short Path Thermal Desorption System but could also be utilized with other injection systems and techniques.