Product ID : 031305
031305 Sparging Needle, pkg of=5, Length (cm)=11.5, OD (mm)=0.50, ID (mm)=0.20
More details on associated web page:
- Stainless Steel Sparging Needles for Sample Purging System A variety of lengths of the stainless steel sparging needles are available for the S.I.S. Purge & Trap system.
A variety of lengths of the stainless steel sparging needles are available for the S.I.S. Purge & Trap system.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
A complete line of Brass and Stainless Steel Fittings for GC, MS and general laboratory use.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
Fittings to connect our 1/4" O.D. GLT desorption tubes to your particular application.
The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.