Beware of recent phishing e-mails. Use our official contact addresses only.
413-284-9975
Adaptas

Stainless Steel In-Line Connector

Stainless Steel In-Line Connector
Hover over image to zoom
Price: 11
Product ID : SC1
SC1 Stainless Steel Connector, Agilent Inline, OD (in)=0.128, ID (in)=0.057, Length (in)=0.305

Description

S.I.S. supplies stainless steel connectors manufactured from type 316 stainless steel. These 0.128" O.D., 0.057" I.D. connectors are 0.305" long and are supplied with two stainless screws.

This connector is used by several MS instrument manufacturers and it can replace the Thermo #04002-20040 and Agilent# 05930-20441 connectors.

Related Products
Popular Items also Purchased
  • Push-On Crimp Contact/ThermocouplesPush-On Crimp Contact/Thermocouples
    Electrical Connectors
  • In-Line ConnectorsIn-Line Connectors
    Electrical connectors
  • Thermo/Finnigan 5100 Ceramic Body FilamentThermo/Finnigan 5100 Ceramic Body Filament
    The 0.032" diameter filament leads protrude out of the side to clear the source block and permit attachment with two in-line connectors.
  • Single Hole Round Ceramic Tube InsulatorsSingle Hole Round Ceramic Tube Insulators
    The tubes are constructed of a pure 99% alumina ceramic that has superior gas and vacuum tightness and excellent insulating properties even at elevated temperatures.
  • Inland 45 Mechanical Pump OilInland 45 Mechanical Pump Oil
    Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
  • Rhenium Wire and Ribbon - Filament and Heater MaterialRhenium Wire and Ribbon - Filament and Heater Material
    Rhenium Wire and Ribbon is used to manufacture filaments for mass spectrometers and ion gauges as well as medical applications.
  • Two Hole Round Ceramic Tube InsulatorsTwo Hole Round Ceramic Tube Insulators
    The following two hole alumina ceramic tube type insulators are available in six inch lengths.