
High Performance Detector upgrade for the HP5971/5972/GCD Mass Selective Detector
|
[1]
Photonis 5778 Multiplier (SIS Part #30148)
For use on instruments:
Agilent 5971/A MSD,
Agilent 5972/A MSD,
Agilent GCD
OEM Part #:
#05971-80101
#05971-80102
#05971-80103
Warranty:
Photonis Channeltrons(R) are designed and manufactured to the highest
standards in the world. It is warranted against all defects
in materials and workmanship for one year after installation.
In addition, if you install your Channeltron(R) electron
multiplier and are not completely satisfied with its performance,
return it promptly for replacement or refund.
|
The Channeltron® 5778 Mass Spec Detector offers previously unobtainable levels of performance for the Hewlett-Packard 5971A and 5972A MSDs. If your applications demand high sensitivity, extended linear dynamic range and longer detector life, the 5778 Mass Spec Detector meets your requirements.
The sensitivity of the 5778 allows you to detect sub picogram and femtogram levels from complex mixtures. The 5778 provides this sensitivity through superior signal collection and reduction of unwanted noise for the highest signal-to-noise level available.
The 5778's hardware has been optimized through computer modeling to maximize signal collection. The improved detector geometry allows this signal to be amplified to a higher degree than competitive detectors, maximizing signal-to-noise measurements. And with Burle's patented photon-absorbing hardware, unwanted collection of photon and neutral noise is virtually eliminated.
Figure # 1 shows the improvement in sensitivity that has been achieved by Burle with the development of the Model 5778 multiplier. The chart demonstrates an increase of at least 5 fold increase in signal-to-noise ratios. Comparison , with other the manufacturers multipliers has demonstrated the Burle Model 5778 is the most electron multiplier available for the HP 5971 and 5972 instruments (see "The Mass Spec Source", Feb. 1995).
Extended linear dynamic range of the 5778 Mass Spec Detector results in reproducible spectra and accurate quantification for both trace and high-level analysis. Burle's dual-stage design provides an absolutely linear response beyond the limits of the instruments and all other available detectors.
Improved long-term performance stability ensures consistently accurate results, requiring less frequent recalibration. And longer life means less down-time, making the 5778 the most economical detector available for the HP 5971A and 5972A MSD.
Easy installation is guaranteed with Burle's patented, plug-in ceramic board-mounted design. The detector simply snaps into place in seconds, while ensuring alignment of the critical ion optics. Complete Installation instructions.
Storage and Handling
Store up to five months in the detector's original packaging. For longer periods, store in a clean dry nitrogen box, or under vacuum of 10-2 torr or better. Proper maintenance will contribute significantly to the long life of your detector. While the active surface of the 5778 Electron Multiplier can be repeatedly exposed to air without degradation, keep it free of dust, lint or other particles. Use high purity nitrogen gas to remove any contaminants. Use talc free finger cots or gloves and degreased tools and equipment during handling and installation.
Warranty
The Burle 5778 Multiplier is warranted against defects in materials and workmanship for a period of one year from the date of shipment.
The newest technologies and highest performance from the world's largest supplier of standard, retrofit and custom detectors for mass spectrometry.
| SPECIFICATIONS | |
|---|---|
| Instrument | HP 5971A/5972A MSD |
| Performance level | High sensitivity; Extended linear dynamic range; Long Detector Lifetime |
| Operation | Dual-stage |
| Linear range | 0-50 microamps output current |
| Configuration | High-purity alumina ceramic board mount |
| Gain | 1 x 105 at 1400 V; 1 x 107 at 2700V |
| Resistance | 10 x 106 ohms min. at 100°C; 14 x 106 ohm min. at 30°C |
| Dark current | 5 x 10-12 amps at 2000V Max |
| Max. recommended pperating voltage | 3000V |
Typical Performance
| Part No. | Multiplier Model | HP Model No. | HP Part No. |
|---|---|---|---|
| 30092 | 4770 | 5980, 5980A, 5981-84, 5930, 5985, 5987, 5985B (3 leads)(pos. ion only) | 1970-0063 |
| 30093 | 4770B | 5993B, 5985, 5987, 5988, 5988A, 5985B (4 leads)(pos. and neg. ion) | 05985-60180 |
| 30097 | 4772H | 5989, 5989A | 05989-80002 |
| 30148 | 5778 | 5971, 5971A, 5971B, 5972, GCD (New Style) | 05971-80101, 05971-80102, 05971-80103 |
| 30147 | 5772 | 5970, 5992, 5992A, 5992B, 5993B, 5970A, 5995, 5970B | 1970-0075 |
| Part No. | Description | UOM | Picture | est wt. |
Quantity In Stock |
Price | Quantity to order |
|---|---|---|---|---|---|---|---|
| 30148 | Burle Channeltron(R) 5778 Electron Multiplier | EA | ![]() |
2 | 4 | $1794.00 | |
Ordering information.
International (non-US) prices available through your
local dealer.
|
|||||||
Copyright 2002 by BURLE Technologies, Inc. All rights reserved. MAGNUMTM, MAGNUMTM ELECTRON MULTIPLIER and SPIRALTRONTM
| SIS Catalog Cross Reference | |
|---|---|
| Page # | Part Numbers |
| A47 - Burle* Electron Multipliers | 30148 |
| A48 - Burle* Electron Multipliers | 30148 |
| B10 - Agilent 5971/5972 GCD Accessories by S.I.S.â„¢ | 30148 |
| B4 - Agilent Electron Multipliers by S.I.S.â„¢ | 30148 |