SIS Catalog Online

ASI QuickSplit

Fixed Flow Splitters

E66

Scientific Instrument Services, Inc.

Phone: 908-788-5550

www.sisweb.com/catalog/08/E66

Fixed Flow Splitters - Post-Column Applications

Post-column splitting is fairly straight forward. Devices contribute to chromatographic dispersion so care must be given to connecting

tubing and fittings, especially at low flow rates. The pressure drop specification for all input flow ranges is 500psi with water at the corre-
sponding inlet flow rate respectively. To assure a maximum pressure drop of 500 psi across the splitter, please specify the inlet flow when
the splitter is ordered.

QuickSplit Binary Fixed Flow Splitter

This easy to use "plug and play" device comes with a

predefined split ratio eliminating tedious adjustments to
capillary tubing. Split ratio changes are accomplished by
changing the resistor set. The split ratio is determined by
the ratio of fluid resistors installed in the splitter manifold.
The pressure drop across a fixed splitter for post column
applications is typically low, less than 500 psi. The low
internal dead volume prevents excessive dispersion and
the replaceable inlet filter insures robust operation.
Available in models for analytical, semi-preparative,
preparative, and high preparative inlet flow rates.

Analytical Splitters - Binary

Analytical range, 0.1 mL/min. to 5 mL/min. input flow

These splitters will produce under 500 psi backpressure with water at 1.0 mL/min. The backpressure will decrease or increase in pro-

portion to flow rate changes

Analytical Replacement Resistor Sets - Binary

Interchangeable
Fluid Resistor Cartridge

Part No.

Description

Split Ratio

620-PO10-03

Analytical Fixed Flow Splitter, Post-Column

2,000:1