Agilent MS Source Cleaning (Catalog B5)

B5

Agilent MS Source Cleaning

FAX: 908-806-6631

www.sisweb.com

Expert Cleaning and Repair of Mass Spectrometer Sources

Agilent Technologies 5988 Source Cleaning

Agilent Technologies 5989 Source Cleaning

Agilent Technologies 5970 Source

Cleaning

S

cientific Instrument Services™ now offers the service of

mass spectrometer source cleaning. This is NOT an

exchange program. The same source that we receive

from you is cleaned, repaired and returned back to you ready to

install into your mass spectrometer.

72 Hour Turnaround on Source Cleaning

Sources should be sent to SIS via Federal Express or other

overnight carrier. Once received, they will be cleaned & returned

within 72 hours by an overnight carrier such as Federal Express.

Please include your purchase order when sending to

express carrier.

Service Notes

Source cleaning includes our standard cleaning methods,

outlined on our SIS web site:

(www.sisweb.com/reference/tips/

msclean.htm)

All parts are thoroughly cleaned, rinsed in solvents

& baked out in an oven and ready for installation into the mass

spectrometer. Most ceramic insulators will be cleaned or

replaced, if broken (exception noted below). If old filaments are

included on the source, they are repaired & are accurately aligned

on the source using an optical video microscope system. If metal

parts need to be replaced, this may delay return delivery, until we

can obtain replacement parts from the manufacturer & additional

charges may be incurred. If the source heaters are sent in with

your source, additional charges will be incurred if these items

are

damaged and need additional repairs or replacement. All the

mass spectrometer sources listed below have been repaired by

SIS If your mass spectrometer source is not

listed below, it

can

still be repaired by SIS Send your source with old filament(s)

attached, along with a purchase order to:

Scientific Instrument Services, Inc.™ , 1027 Old York Rd.,

Ringoes, NJ 08551-1039

Attn: Source Repair - Rush

Not included in standard source cleaning price:

replacement of missing screws

and other metal source parts as well as broken or missing filament and target ceramics,

repeller insulator, and plunger guide.

Shipping in for Repair:

normally the source block and associated parts are shipped

in for repair. The source should be thoroughly wrapped in packaging material and double

boxed to avoid damage in shipment.

Parts Cleaned: entire source block, lens

stack assembly, insulators, filament and

repeller assembly.

Parts Replaced if missing or broken: two

new filaments and lens ceramic spacer.

Parts Cleaned: entire source block,

lenses, insulators, target, filament and

plunger assembly.

Parts Replaced if missing or broken:

lens stack insulators and new filament.

Parts Cleaned: entire source block,

lenses, insulators, target, filament and

plunger assembly.

Parts Replaced if missing or broken:

plate insulators and new filament

Parts Cleaned: entire source block, lenses,

insulators, filament and repeller assembly.

Parts Repaired: two filaments.

Part No.

Description

REP77 Part #REP77—Click for details
Current Price: $450.00
Unit of Measure: EA
Est. Ship Weight=5 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.

Source Cleaning of Agilent 5988

Part No.

Description

REP77 Part #REP77—Click for details
Current Price: $450.00
Unit of Measure: EA
Est. Ship Weight=5 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.

Source Cleaning of Agilent 5989

Part No.

Description

REP76 Part #REP76—Click for details
Current Price: $435.00
Unit of Measure: EA
Est. Ship Weight=2.5 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.

Source Cleaning of Agilent 5970

Part No. Description

REP100 Part #REP100—Click for details
Current Price: $335.00
Unit of Measure: EA
Est. Ship Weight=1.5 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Source Cleaning of Agilent 5971/72/73/75/77GCD

Agilent Technologies 5971/5972/5973/

5975/5977 GCD Source Cleaning

Not included in standard source cleaning price:

replacement of missing screws

and other metal source parts as well as broken or missing filament and target ceramics,

repeller insulator, and plunger guide.

Shipping in for Repair:

normally the source block and associated parts are shipped

in for repair. The source should be thoroughly wrapped in packaging material and double

boxed to avoid damage in shipment.

24 Hour Turnaround Available

Rush Charge may apply