- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- TD
- ▶
- TD-5 (single sample)
- Print Catalog
- ▶
- Catalog Page C1Short Path™ Thermal Desorption TD-5 [C2] Short Path™ Thermal Desorption TD-5 [C3] Short Path™ Thermal Desorption System TD-5 [C4] Short Path™ Thermal Desorption TD-5 [C5] AutoDesorb™ [C6] AutoDesorb™ [C7] AutoDesorb™ [C8] AutoDesorb™ [C9] Short Path™ Thermal Desorption Tubes [C10] Desorption System Fittings [C11] TD1/TD2/TD3/TD4/TD5/ Needles & Seals [C12] AutoDesorb™ Needles, Seals & Connecting Tubes [C13] Adsorbent Resin for Trapping Volatiles [C14] Adsorbent Resin for Trapping Volatiles [C15] Thermal Desorption Conditioning System [C16] Thermal Desorption Conditioning System [C17] Heated Thermal Desorption Sampling Chambers [C18] Extraction Cell for Papers, Polymers & Food Containers [C19] Thermal Desorption Sample Collection System [C20] Thermal Desorption Sample Collection System [C21] Cryo-Trap™ for TD-5 [C22] Cryo-Trap™ for the AutoDesorb™ System [C23] Purge & Trap System [C24] Temperature Controller & Heater Sleeves [C25] Thermal Desorption Accessories [C26] Thermal Desorption Low Flow Air Sampling Pump [C27] Gilibrator™ Air Flow Calibration System [C28] Gilibrator™ Air Flow Calibration System [C29] ALTEF Gas Sampling Bags [C30]
- ▶
- Catalog Page C2 (This Page)
Applications
Short Path™ Thermal Desorption TD-5
C2
Phone: 908-788-5550
www.sisweb.com
A Microprocessor Controlled Short Path Thermal Desorption System for the
Analysis of Volatiles and Semi-volatiles by GC and GC/MS Systems.
Thermal Desorption (Purge & Trap):
Environmental Air Analysis
Flavor and Fragrance
Analysis
Off odor/Off-Flavor analysis
Forensic Arson Analysis
Residual Gas, Solvents and Chemicals in:
Pharmaceuticals
Packaging Materials
Building Products
Food Products
Natural Products
Direct Thermal Extraction of:
Plastics
Synthetic Fibers & Materials
Spices
Natural Products
Pharmaceuticals
Finished Products
Features:
•
High sensitivity thermal desorption and direct thermal
extraction of solid, liquid, and gas samples
•
No memory effects – each sample has its own inde-
pendent and “short” flow path from sample to GC,
eliminating transfer lines as a source of contamination
•
Stainless steel sample tubes (or silco treated) are inert
to samples and strong for sample handling
and transporting.
•
Rapid cryogenic (CO2 or LN2) cooling and heating of
the GC column head for improved chromatographic
resolution (optional Cryo-Trap™ accessory).
•
Mounts overtop most GC injection ports—easily
removable and transferable.
•
Automatic injection and desorption of sample into GC
(pneumatic driven injector).
•
Windows-based software for control and monitoring
of the system.
•
Seamless integration into Agilent ChemStation™
and Thermo Fisher Scientific Xcalibur™
•
Optional - stand alone operation with other top
injecting GC’s
•
Desorption: temp range: 20° to 400°C, either
isothermal or temperature programmed.
Max heat
rate: 100°C/min.
•
Cryo-trap: min temp: -70°C (CO2) or -180°C (LN2).
Max temp: 400°C.
Max heat rate: 10°C/sec.
T
he new SIS TD-5 is a "short path" thermal desorption
system. It provides unattended thermal extraction (ther-
mal desorption) and injection of volatile and semi-volatile
organics from solid, liquid and gas samples into a gas chromato-
graph (GC). The system delivers samples into the GC along an
optimal “short path,” thereby eliminating
transfer lines and cross-
sample contamination issues found in previous systems.
A sample for analysis is introduced into a desorption tube, which
is then fitted with a needle and attached to the TD-5 Desorption
Unit. The Desorption Unit sits over the GC injection port, where,
upon signal from the PC software, it automatically injects and des-
orbs the sample into the GC injection port and column using the
temperatures and times prescribed in the desorption method.
The TD-5 System consists of the Desorption Unit (which con-
tains the sample analysis hardware), an Electronics Console (which
contains a microprocessor and power supply), and a Windows-
based Thermal Desorption software (which provides control and
monitoring of the system). This software can be fully integrated with
selected GC data systems (e.g. Agilent ChemStation), or it can
operate fully independently from the GC data system. Various
accessories are available such as the Cryo-Trap, which cryogeni-
cally cools and rapidly heats the GC column head for improved
chromatographic resolution.
Multi-sample version of our Thermal Desorption System is
also available. See pages C6 - C9 or visit www.sisweb.com
- Table of Contents
(Print Catalog)Table of Contents of the Scientific Instrument Services general catalog volume 36. - Print Catalog C. Short Path™ Thermal Desorption SIS Vol. 36 catalog Section C - Short Path™ Thermal Desorption.
- Print Catalog C. Short Path™ Thermal Desorption SIS Vol. 36 catalog Section C - Short Path™ Thermal Desorption.
- Short Path™ Thermal Desorption TD-5
(Catalog C2) - Short Path™ Thermal Desorption TD-5
(Catalog C3)