Product ID : S1003
S1003 Swagelok Fitting, Type=Tees, Size (inches)=All 1/16, Material=Stainless Steel
More details on associated web pages:
- Agilent (Hewlett Packard) Part Number Cross Reference Scientific Instrument Services carries a wide selection of parts for all models of Agilent (Hewlett Packard) mass spectrometers. In order to aid you in the selection of replacement parts for your instrument, the following part number cross reference chart can be used. If a part number is not listed, it either means we do not have that part in our inventory or perhaps we are not aware of the Agilent part number in relation to our inventory. If you are looking for a part not listed below, give us...
- Swagelok® Fittings A complete line of Brass and Stainless Steel Fittings for GC, MS and general laboratory use.
- Swagelok® Fittings
A complete line of Brass and Stainless Steel Fittings for GC, MS and general laboratory use.
Ferrules, Jet Separators, and GC column.
The stainless steel metal frit spargers have been designed for use with the S.I.S. purge and trap system.
Vespel® ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.