TBD in MS>Filaments
- Yttria coated SISAlloy®
(Yttria/Re alloy)SIS can repair your filaments with our non-sagging filament wire (SISAlloy® yttria/rhenium alloy with yttria coating). Users have experienced filament lifetime increases of 2 to 3 times compared to the standard uncoated rhenium filaments. - SISAalloy®
(Yttria/Re alloy)SIS introduces their new Yttria Rhenium alloy filament wire. In these studies we have discovered that by alloying Rhenium with a small concentration of Yttria, the crystal structure of the rhenium material was altered, which resulted in a stronger filament that is much less susceptible to warping
TBD in MS>Probes
- Thermo Hi Temp The probes can be used from ambient temperature up to 800 degrees C with ballistic temperature ramp of over 700 degrees C/min.
- Thermo - AutoProbe Automated direct insertion probe for the Thermo PolarisQ™ and TRACE DSQ™ mass spectrometers. Samples in about 3 minutes. Open Access and Xcalibur™ integration.
- Agilent DIP A ½ inch probe inlet, provides the user with greater flexibility and much faster ramp rates than the standard HP DIP probe.
- Agilent Hi Temp The probes can be used from ambient temperature up to 800 degrees C with ballistic temperature ramp of over 700 degrees C/min.
- Agilent DCI The DCI probe utilizes a replaceable filament wire at the end of the probe which serves to both hold the sample and heat the sample.
- Agilent Probe Inlet Eliminates the accidental venting of the mass spectrometer via the probe inlet
SIS can manufacture custom probes and accessories for your mass spectrometer. These include direct insertion probes (DIP) with sample vials, direct exposure probes (DEP) with a filament wire, and probes that introduce calibration gas.
TBD in MS>Heaters and Sensors
- Kobra Resistors High Voltage Resistors
TBD for placement from main MS page
- Jet Separators SIS Repairs and Cleans ESI and Jet Separators.
- APPI Sources
(Syagen)Syagen atmospheric pressure photoionization (APPI) sources available from Scientific Instrument Services, Inc. - Waters ESI Source Parts These products are compatible with the ESI Probe Capillary and Perlast O-Ring.
- Print Catalog Section A: Mass Spec SIS Vol. 36 catalog Section A - MS Supplies and Services.
- Print Catalog Section B: Mass Spec Supply by Instrument SIS Vol. 36 catalog Section B - Supplies for specific mass spectrometers.
(This was in the MS cleaning pg blurb) Supplies for cleaning your mass spectrometer and instrument parts.
See also our related cleaining articles: