SIS Catalog Online >> Page Number: [ previous page next page ]
[Table of Contents > Vacuum System Supplies | Index] Zoom: [ Printable PDF]
Ordering: Click part number to add to shipping cart. Contact your Local Dealer for non-US prices.
Convection Ionization Gauges
F10
Scientific Instrument Services, Inc.
TM
Phone: 908-788-5550
www.sisweb.com/catalog/08/F10
Features
-
Models available with measurement unit & display in Torr/mTorr or Bar/mBar
-
Wide measurement range 10
-4
to 1000 Torr. or 1x10
-4
to 1333 mBar
-
Low cost, plug-compatible direct drop-in replacement for the most basic GP Mini-
Convectron
®
models.
-
Wider measuring range and better accuracy than traditional Thermocouple gauges
-
Built-in digital display.
Low cost drop-in replacement for the best selling Convectron
®
Gauge
Temperature compensation has been moved out of the vacuum environment, significantly reducing costs and improving performance.
The gauge is shielded against RF interference. A fine mesh screen in the gauge inlet port helps prevent particulate contamination from
entering the gauge. changes were made to improve mechanical strength, resulting in a more robust gauge less susceptible to mechani-
cal shock and vibration. Guided by our years of experience manufacturing these gauges, our CVG sensor was designed to be more repro-
ducible and easier to make.
The CVM-211 "Stinger"
InstruTech's CVM Series modules add the necessary signal conditioning electronics to turn the CVG gauge into a vacuum measuring
instrument. The CVM-211 "Stinger" module provides a standard non-linear analog output, and one setpoint relay. In addition, a built-in
LED display gives the user a convenient interface for setup and operation of the vacuum gauge.
Directly drop-in replacement for GP Mini-Convectron modules
The Stinger can directly replace the most basic Granville-Phillips Mini-Convectron modules, at significantly lower cost. the 9-pin D con-
nector has the same pinouts and signals as the corresponding Mini-Convectrons. The non-linear analog signal and setpoint relay config-
uration are identical to their corresponding Mini-Convectron functions. Except for the Stinger's smaller size and lower cost, you and your
process will never know the difference.
Low cost upgrade for thermocouple TC vacuum gauges
The Stinger provides a wider measuring range than traditional thermocouple vacuum gauges - from 10
-4
Torr to atmosphere - so you
can monitor your entire pumpdown and vent cycle. Convection -Pirani gauges are more accurate than thermocouple gauges, especially
at lower pressures. And depending on your gauge/readout configuration, the cost of a Stinger is about the same, or very little more, than
the cost of a TC gauge system.
See Page F12 for Power Supplies
InstruTech - CVM-211 "Stinger
TM
" Convection Vacuum Gauge Module Measurement
Gauge Tube and Electronics in One Convenient Package
Specifications
Measurement range
1x10
-4
to 1000 torr
1x10
-4
to 1333 mbar
1x10
-2
Pa to 133 kPa
Display
3 digit LED (3 digits from 999Torr
to 10.0mTorr, 2 digits from 9.9 to
1.0mTorr).
Housing
Molded Plastic
Fittings/flanges
1/8"NPT-1/2" tubulation, 4VCR,
8VCR, Mini-Conflat (NW16CF),
2-3/4" Conflat (NW35CF), KF16,
KF25, KF40
Temperature - operating
0°C to 40°C
Temperature - bakeout
70°C maximum, non-operating
with cable or electronics removed
Humidity - operating
0 to 95% RH non-condensing
Mounting Orientation
Horizontal recommended
Analog Output
1) log-linear 1 to 8 Vdc.,
1V/decade, or
2) non-linear analog S-curve
0.375 toe 5.659 Vdc
Input Power
11 to 30 Vdc, protected against
power reversal, transients, and
over-voltages.
Trippoint relay
one, single-pole double-throw
relay (SPTD)
Contact Rating
1A at 30 Vdc resistive, or ac non-
inductive
Connector
9-pin D male
Materials exposed to gases
Gold plated tungsten, 304 & 316
stainless steel, glass, nickel,
PTFE
Internal Volume
26 cm
3
(1.589in
3
)
Internal Surface Area
59.7 cm
3
(9.25 in
3
)
Weight
136 gm (4.8 oz.)
RF/EMI protection
CE compliant
Part No.
Part No.
(With Log-Linear
(With Non-Linear
Description
Analog Output)
Analog Output)
Torr/mTorr Display
CVM211GAL
CVM211GAA
1/8" NPT - 1/2" tube
CVM211GBL
CVM211GBA
NW16KF
CVM211GCL
CVM211GCA
NW25KF
CVM211GDL
CVM211GDA
NW40KF
CVM211GEL
CVM211GEA
1-1/3" Mini-CF/NW16CF
Mini-Conflat
CVM211GFL
CVM211GFA
2-3/4" CF/NW35CF Conflat
CVM211GGL
CVM211GGA
1/4"Cajon 4VCR female
CVM211GHL
CVM211GHA
1/2" Cajon 8VCR female
bar/mbar Display
CVM211GAA-B-L
CVM211GAA-B-NL
1/8"NPT - 1/2" tube
CVM211GBA-B-L
CVM211GBA-B-NL
NW16KF
CVM211GCA-B-L
CVM211GCA-B-NL
NW25KF
CVM211GDA-B-L
CVM211GDA-B-NL
NW40KF
CVM211GEA-B-L
CVM211GEA-B-NL
1-1/3" Mini-CF/NW16CF
Mini-Conflat
CVM211GFA-B-L
CVM211GFA-B-NL
2-3/4" CF/NW35CF Conflat
CVM211GGA-B-L
CVM211GGA-B-NL
1/4" cajon 4VCR female
CVM211GHA-B-L
CVM211GHA-B-NL
1/2" Cajon 8VCR female
tip...
Page Number: [ previous page next page ]
Contacting our Customer Service Department--comments, questions, or anything can't find?
Call/e-mail/FAX us, or type your comments below.
Name/organization:
Email: Phone/fax:
Regular business hours are 8:00 AM to 5:30 PM EST, M-F.
E-mail replies are normally expected within one business day.
PHONE: (908)788-5550;   FAX: (908)806-6631;   E-MAIL: contact us WEB: www.sisweb.com
ADDRESS: Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551.
© 1996-2008 Scientific Instrument Services, Inc. [Trademarks]