www.sisweb.com/catalog/08/E35
E35
SIS
TM
HPLC Fittings
Scientific Instrument Services, Inc.
TM
FAX: 908-806-6631
Part No.
Description
1/16" 10-32 thread 0.012" thru-hole with two one-piece
fingertight fittings (P/N E351)
1/16" 10-32 thread 0.012" thru-hole without fittings
1/16" 1/4"-28 thread 0.020" thru-hole with two flangeless
fittings and ferrules (P/N E230, E903)
1/4"-28 thread 0.020" thru-hole without fittings
1/8" 1/4"-28 thread 0.050" thru-hole with two flangeless
fittings and ferrules (P/N E231, E904)
Through-hole
Part No.
Tubing Size
(nominal)
Fitting/Ferrule
1/16"
0.010"
2ea. E401/E906
1/16"
0.020"
2ea. E401/E906
1/16"
0.030"
2ea. E401/E906
1/8"
0.080"
2ea. E415/E907
1/8"-1/16"
0.030"
1ea. E401/E906
Reducer
1ea. E415/E907
Part No.
Description
PEEK Tee with 3 ea. P/N E351 fitting
PEEK Cross with 4 ea. P/N E351 fitting
PEEK Tee only
PEEK Cross only
Part Number
Description
PEEK mixing tee
complete with
one-piece fittings
Use our backpressure regulators for stable
split-flow applications (page E39).
Part No.
Description
PEEK Two-piece fingertight nut
PEEK Single ferrule 1/16" ID
PEEK Micro-ferrule 0.008" ID
PEEK Micro-ferrule 0.016" ID
PEEK
TM
Unions
Connect two pieces of 1/16" or 1/8" tubing. Low dead volume connections for 10-32 or 1/4"-28 configurations.
Order with or without fittings.
Stainless Steel Unions
Complete with fittings and ferrules.
PEEK High Pressure Crosses and Tees
0.4 mm (0.016") thru-hole assures minimum dead volume in these 100% biocompatible accessories. Compatible with
most organic solvents and buffers. Order with or without one-piece fittings.
PEEK Biocompatible Mixing Tee
Completely metal-free, this accessory has a built-in, 100% biocompatible 5µm filter. Introduction angle and PEEK/PTFE filter provide
more complete mixing than with a conventional Tee. With total dead volume of only 4 µl and a 420 bar (6000 psi) pressure
capacity, this unit is great for high pressure gradient mixing as well as post-column reactions!
PEEK Two-piece Fingertight Fittings and Micro-Ferrules for Capillary Tubing
Fingertight fittings with a separate ferrule for connections to 10-32 female ports. Micro-ferrules are an S.I.S. exclusive, eliminating the
need for PEEK sleeves when holding capillary tubing. Use micro-ferrules for holding fused silica tubing, electrospray tips, etc.
PEEK/PTFE Frit
In
In
Out
The two solvent streams are perfectly
mixed in the vortex mixing chamber
tip...
