C31
Temperature Controller & Heater Sleeves
Scientific Instrument Services, Inc.
™
FAX: 908-806-6631www.sisweb.com/catalog/08/C31
T
he new Model CT101 is a compact bench top temperature controller that can be
utilized to supply the heating and temperature controlling of a variety of labora-
tory accessories. The console is compact, only 5" high x 6" wide x 6" deep. It
consists of a high quality Watlow controller with a 10 amp relay output. Feedback and
temperature control can be accurately controlled via a standard J type thermocouple (iron-
constantan). Temperature can be regulated and monitored via the LED display to +/- 1°C.
The controller is normally set up to monitor in degrees C but can be modified for degrees
F. A switch on the front panel controls the total power to the system and a separate switch
turns off the heater power. Standard features include illuminated power switches, a 3-wire
fused cord and a fused output receptacle.
The back panel of the controller contains two separate fuses, one for the total system
and the second for the heater output. A 110 volt twist type receptacle provides the outlet
for a wide variety of heater accessories. To modify existing heaters for this plug, a twist
type plug is available. The thermocouple is attached via a standard thermocouple plug.
Accessory heater plugs & thermocouple plugs are available for connection of other
heaters and J-Thermocouples.
Bench Top Temperature Controller Model CT101
Main
Power
S.I.S. Temperature Controller
Scientific Instrument Services, Inc. Ringoes, NJ USA
Heat Control
Heater
WATLOW
LD
AL
M
PROCESS
A
M
SERIES 985
MAN
1 0 0
1 0 0
Part No.
Description
912000
Part #912000--Click to order
Current Price: $875.00
Unit of Measure:
EA
Est. Ship Weight=10 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Temperature Controller - Model CT101
912000-220
Part #912000220--Click to order
Current Price: $875.00
Unit of Measure:
EA
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Temperature Controller - 220VAC Unit
912001
Part #912001--Click to order
Current Price: $34.00
Unit of Measure:
EA
Est. Ship Weight=0.25 lbs
Quantity in Stock=14
Accessory Twist Plug Connector
912002
Part #912002--Click to order
Current Price: $22.00
Unit of Measure:
EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Thermocouple Connector
•
Compact Portable Temperature Controller with
Thermocouple Feedback Control
•
Fully Wired with convenient Receptacles for Heater Output
and Thermocouple
•
Single Heating Output with 10 Amp relay output capacity
(110 Volt)
•
Uses Standard J Thermocouple
•
Double Fused Circuit
Specifications
Power Input
•
110 Volt
•
10 amp
•
3 wire grounded circuit
Power Output
•
110 Volt
•
10 amp
•
fused output
Feedback Thermocouple
•
J Thermocouple
Front View
T
he Heater Sleeves for the Purge & Trap System are
available in two sizes for the standard sample purging
system tubes supplied by S.I.S. They are designed to fit
these sampling tubes with the foam break-
ers. Other sampling tubes can be used,
provided they fit tightly into the heater
sleeves to provide good surface
contact thereby providing for uni-
form sample heating. The
outer facing of the case is
constructed of a new
aluminized
fiber-
glass
insulated
material, for a
p r o f e s s i o n a l
appearance. The
heating
coils
inside the blanket
sleeve consist of
durable, multi-stranded resistance
wire that is insulated and knitted
over a large surface area into the
inner wall of the heater sleeve. In
addition a J type thermocouple is
encased inside the heater sleeve
for accurate temperature mea-
surement and for use in tempera-
ture control when used with S.I.S.
temperature controller. Both the
24" heater leads and thermocouple leads are encased in a fiber-
glass sleeve and terminate in a 110 volt twist plug for the heater
and a thermocouple plug for the thermocouple. Both of these fit-
tings plug into the back of the S.I.S. temperature controller. A
Velcro hanging strap is attached to the heater sleeve for use in
attaching the blanket to the purging system. When used with the
S.I.S. temperature controller temperatures can be maintained to
within 2°C from room temperature to 125°C.
Main
Power
S.I.S. Temperature Controller
Scientific Instrument Services, Inc. Ringoes, NJ USA
Heat Control
Heater
WATLOW
LD
AL
M
PROCESS
A
M
SERIES 985
MAN
1 0 0
1 0 0
Heater Sleeves for Sample Purging System
Part No.
Description
Size (l x w)
Voltage
Wattage
Amps
783016
Part #783016--Click to order
Current Price: $280.00
Unit of Measure:
EA
Est. Ship Weight=1 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Heater Sleeve, 5 ml
5" x 2"
110 VAC
45 Watts0.39
783017
Part #783017--Click to order
Current Price: $290.00
Unit of Measure:
EA
Est. Ship Weight=1 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Heater Sleeve, 25 ml
6.3" x 3"
110 VAC
85 Watts0.74