C11
AutoDesorb
TM
Scientific Instrument Services, Inc.
TM
FAX: 908-806-6631
www.sisweb.com/catalog/08/C11
Ordering Information for the AutoDesorb
TM
Short Path
TM
Thermal Desorption System
W
hen ordering the AutoDesorb system, a number of accessories are available depending on the application requirements and
the GC the system is to be installed on. Installation by Scientific Instrument Services
TM
is required as listed below and the
cost is dependent on your location. The items marked "recommended" will make the operation and use of the AutoDesorb
easier and will add to the versatility of the AutoDesorb System. For instance the system is designed to operate with the optional Cryo-
Trap accessory. The Cryo-Trap
TM
will enable the analysis of a wider range of analytes and make the system easier to use and increase
its versatility. The items marked "optional" should be purchased only if an application which requires it is contemplated.
Accessories for the AutoDesorb
TM
System
The Demo Laboratory at Scientific Instrument Services is available for the demonstration of the AutoDesorbTM
or TD5 Thermal Desorption Systems as well as for the running of customer demo samples at no charge. Call
SIS for more information in order to visit our labs or to have our technical staff evaluate the application of
Thermal Desorption for the analysis of your samples.
Major Consumable Parts and Replacement Parts for the AutoDesorb
TM
System
Part No.
Description
AutoDesorb System, Model 2000, including AutoDesorb Tower, Electronics and Software
Accessory Kit, 12 Desorption tubes, 12 needles and 12 seals
AutoDesorb Installation, Continental US except New Jersey and Eastern Pennsylvania
includes 2.5 days of installation and training, additional days at additional cost
AutoDesorb Installation, New Jersey and Eastern Pennsylvania (within daily commute)
includes 2.5 days of installation and training, additional days at additional cost
Installation Kits - Select one (1) of the following depending on the GC onto which the AutoDesorb is to be installed
AutoDesorb Installation Kit for the Agilent 6890 GC (Agilent 5973/5975 MSD with GC), includes valves
and other components specific to the Agilent 6890 GC operating under Windows NT.
AutoDesorb Installation Kit for the Agilent 5890 Series II GC (Agilent 5972 and 5971 MSD with GC), includes
components specific to the Agilent 5890 GC. Note: System must be operating under the
Agilent GC ChemStation & MS ChemStation (Windows 95, Windows NT, or Windows XP).
* Subject to change based on location.
The AutoDesorb System is not currently designed to operate on any other GC Systems other than the Agilent 6890 and 5890 and the Thermo
Fisher TRACE
TM
GC operating under Xcalibur
TM
Software.
Need
Part No.
Description
Page No.
Recommended
Cryo-Trap for the AutoDesorb System, 2" long,
C25
Select one of the Valve Kits below depending on your cooling needs
Recommended
LN2 Valve Kit for the Cryo-Trap, includes valve and tubing
C25
Recommended
CO2 Valve Kit for the Cryo-Trap, includes valve, adapter and tubing
C25
Recommended
24 Tube Conditioning Oven, conditions desorption tubes,
C19
needles and connecting tubes
Optional
6 Tube Conditioning Oven
C18
Optional
T.D. Sample Collection System
C22
Optional
Portable Air Sampling Pump, Model LFS-113
C36
Optional
Purge and Trap System
C26
Part No.
Description
Page No.
Glass Lined Stainless Steel Thermal Desorption Tube, empty, serialized, 3.0 mm I.D.
C12
Other types and sizes of desorption tubes are also available
AutoDesorb Needle, 35 mm plain stainless steel
C15
Vespel Seal for AutoDesorbTM tubes
C15
AutoDesorb Connecting Tube
C15
VitonTM O ring for Connecting Tube
C15
Cap for Thermal Desorption Tube, solid
C12
PTFE seal for solid caps, pkg of 10
C12
tip...
