Beware of recent phishing e-mails. Use our official contact addresses only.
413-284-9975
Adaptas

Filament & Heater Repair (Catalog A10)

Home
SIS Print Catalog     Page Number: Zoom: [PDF icon Printable PDF]
[A1: General Mass Spectrometer Supplies]
Ordering: Click part number to add to shopping cart or request a quote for your Local Dealer.
background image

Filament & Heater Repair

A10

Phone: 908-788-5550

www.sisweb.com

Agilent 5972, 5973, 5975, and 5977

We currently have four options to repair these filaments.

1.

Part No. FILREP -

Standard 2 coil rhenium filament. The original filament for

the 5972 and 5973 was a 2 coil rhenium filament. We can repair these filaments

for these same specifications.

2.

Part No. FILREPA -

SISAlloy® 4 coil yttria/rhenium filament. The new 4 coil

filaments can be repaired with the new SISAlloy® (yttria/rhenium alloy). This

rhenium alloy filament will have less tendency to warp thereby improving your

filaments performance. For details see page A8

or visit our web site for our 2010

ASMS presentation on these filaments.

3.

Part No. FILREPY -

Standard 2 coil rhenium rilament coated with yttria.

Coating the standard rhenium filament with yttria results in increased filament

life over that of the standard filaments. For details see Page A9

.

3.

Part No. FILREPYA -

Yttria coated SISAlloy 4 coil filament. By coating the

SISAlloy low sag filament with yttria, a filament is produced which will have at

least 2 times the lifetime of the standard filaments. For details see Page A9

.

Other Agilent Filament Repairs

The Agilent Technologies filaments can be repaired by SIS. We completely clean each fila-

ment assembly and replace the rhenium filament or coil. These filaments can also be re-

paired with SISAlloy and also yttria coated filament coils as described above and on pages

A8

and

A9

.

Agilent Technologies FILAMENT REPAIR

New

Agilent Technologies FILAMENTS

HPF4 - 5970 Filament

ITD Filament

HPF2 - 5989 Engine Filament

5972/5973

Filament

5975

Filament*

5971/GCD Filament

5973 CI Filament

DEP Filament

Filaments are aligned and spotwelded into place

The low cost of these filaments makes them not repairable. They are only available as new replacement filaments. See the Agilent

section for pricing. For other new Agilent filaments see our new filament section of this catalog. (A21)

Nearby (Previous/Next) Catalog Pages