- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- TD
- ▶
- AutoDesorb (12 sample)
- Print Catalog
- ▶
- Catalog Page C1Short Path™ Thermal Desorption TD-5 [C2] Short Path™ Thermal Desorption TD-5 [C3] Short Path™ Thermal Desorption System TD-5 [C4] Short Path™ Thermal Desorption TD-5 [C5] AutoDesorb™ [C6] AutoDesorb™ [C7] AutoDesorb™ [C8] AutoDesorb™ [C9] Short Path™ Thermal Desorption Tubes [C10] Desorption System Fittings [C11] TD1/TD2/TD3/TD4/TD5/ Needles & Seals [C12] AutoDesorb™ Needles, Seals & Connecting Tubes [C13] Adsorbent Resin for Trapping Volatiles [C14] Adsorbent Resin for Trapping Volatiles [C15] Thermal Desorption Conditioning System [C16] Thermal Desorption Conditioning System [C17] Heated Thermal Desorption Sampling Chambers [C18] Extraction Cell for Papers, Polymers & Food Containers [C19] Thermal Desorption Sample Collection System [C20] Thermal Desorption Sample Collection System [C21] Cryo-Trap™ for TD-5 [C22] Cryo-Trap™ for the AutoDesorb™ System [C23] Purge & Trap System [C24] Temperature Controller & Heater Sleeves [C25] Thermal Desorption Accessories [C26] Thermal Desorption Low Flow Air Sampling Pump [C27] Gilibrator™ Air Flow Calibration System [C28] Gilibrator™ Air Flow Calibration System [C29] ALTEF Gas Sampling Bags [C30]
- ▶
- Catalog Page C6 (This Page)
AutoDesorb™
C6
Phone: 908-788-5550
www.sisweb.com
The AutoDesorb System is the automated version of the
patented SIS “Short Path Thermal Desorption System”. It is
designed for the automatic and unattended pickup, injection and
thermal extraction (thermal desorption) of volatile and semi-
volatile organics from solid, liquid and gas samples for analysis by
GC and GC/MS.
The AutoDesorb System consists of the AutoDesorb Tower
(which contains the sample analysis hardware), an Electronics
Console (which contains a microprocessor and power supplies)
and a PC Windows Software Package.
The system is operated and controlled by a PC Windows
based software package which operates within the Agilent
Technologies ChemStation software on the Agilent 7850, 6890
GC or Agilent 5973/5975 GC/MS. It also works with the Agilent
5890 series GC (also Agilent 5971, 5972 & 5973 MSD) operating
with the latest version of ChemStation under Windows 95, NT or
XP. This provides a seamless integration of the Agilent GC or MSD
with the SIS AutoDesorb System. The AutoDesorb is also fully
integrated to operate with the Thermo TRACE GC operating under
the Xcalibur™ Software.
The AutoDesorb Tower sits over the GC injection port, where
it is utilized for the direct desorption of both volatile and semi-
volatile samples into the GC injection port and column.
Due to its
“short path” of sample flow, this system overcomes the limitations
of other desorption systems by eliminating transfer lines (which
are easily contaminated by samples) and by providing the
optimum delivery (and therefore maximum sensitivity) of samples
to the GC injector via the shortest path possible, i.e. direct
injection into the GC.
The desorption tube with sample for analysis is fitted with a
desorption tube needle and
attached to a connecting tube. Each
connecting tube is sealed at the top with a spring loaded ball seal
to prevent sample contamination. A Carousel permits 12 samples
to be loaded for the unattended analysis of samples. When
signaled by the PC from the GC software, the AutoDesorb system
automatically locates and loads the sample, and then using the
prescribed desorption method, injects and desorbs the sample
into the GC.
Samples can be run in any sequence using any pre-
viously saved method as specified by the Agilent ChemStation or
Xcalibur GC software.
AutoDesorb - Automated Short Path Thermal Desorption
AutoDesorb - Automated Short Path
Thermal Desorption
The PC Controlled Automated Short Path Thermal Desorption System
is designed for the continuous and unattended thermal extraction of
volatile and semi-volatile organics from solid, liquid and gas samples
for analysis by GC and GC/MS.
Features:
•
Automated Thermal Desorption Sample Introduction System
•
Carousel holds 12 samples for unattended operation
•
Uses the SIS™ Short Path Thermal Desorption technology
•
Designed to operate on the Agilent 7890, 6890
GC, Agilent 5890
GC, and on the Thermo TRACE™
GC with the latest software
•
PC Controlled Operation - User-friendly Graphical Interface
•
Fully integrated with the Agilent ChemStation™ Software
•
No “memory effect” - individual flow path for each sample
•
Mounts overtop the GC injection port
•
Not permanently installed to the GC - easily removable
•
Permits the analysis of volatile and semi-volatile organics
•
Uses P&T Thermal Desorption & Direct Thermal Extraction
Techniques
•
Desorb samples at temperatures from room temperature up
to 450°C either isothermal or with multi-step ramp rates up
to 100°C/minute
•
Silco coated stainless steel desorption sample tubes are inert
and strong for sample handling
•
GC Cryo-Trap Accessory for cryo trapping volatiles during
desorption
AutoDesorb System mounted on the Agilent 6890 GC and 5973 MSD
AutoDesorb Tower and Electronics Console
- Table of Contents
(Print Catalog)Table of Contents of the Scientific Instrument Services general catalog volume 36. - Print Catalog C. Short Path™ Thermal Desorption SIS Vol. 36 catalog Section C - Short Path™ Thermal Desorption.
- Short Path™ Thermal Desorption TD-5
(Catalog C5) - AutoDesorb™
(Catalog C6) - AutoDesorb™
(Catalog C7)