ConnecTite Inlet Liners
ConnecTite is a direct injection liner that is suitable for the analysis of trace level compounds as well as very active compounds. The bottom taper of the ConnecTite liner facilitates maximum transfer of sample due to the direct connection of the GC column into the liner by an interference fit. This connection into the liner eliminates the exposure to hot metal components at the base of the inlet minimizing sample degradation.
Systems equipped with electronic pressure control require a hole in the liner body to maintain system gas flows. Therefore there are three configuration options for ConnecTite liners. No hole (for systems without EPC), hole at the bottom and hole at the top.
ConnecTite liners with a hole at the top of the liner are designed for analysis with aqueous injections or where ompounds of interest elute away from the solvent peak.
ConnecTite liners that have a hole near the bottom are best suited to analyses where a tailing solvent peac could affect early eluting compounds.
| Part No. | Description | UOM | est wt. |
Quantity In Stock |
Price | Quantity to order |
|---|---|---|---|---|---|---|
| 09234401 | LINER PERKINELMER CONNECTITE STD PK 1 | EA | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $60.00 | |
| 092344 | LINER PERKINELMER CONNECTITE STD PK 5 | PK | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $240.00 | |
| 09234501 | LINER PERKINELMER CONNECTITE TOP HOLE PK 1 | EA | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $63.00 | |
| 092345 | LINER PERKINELMER CONNECTITE TOP HOLE PK 5 | PK | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $252.00 | |
| 09234601 | LINER PERKINELMER CONNECTITE BOT HOLE PK 1 | EA | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $63.00 | |
| 092346 | LINER PERKINELMER CONNECTITE BOT HOLE PK 5 | PK | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $252.00 | |
| [*L] Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | ||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||||
| Part No. | Description | UOM | est wt. |
Quantity In Stock |
Price | Quantity to order |
|---|---|---|---|---|---|---|
| 09233901 | LINER BRUKER 1075 CONNECTITE STD PK 1 | EA | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $55.00 | |
| 092339 | LINER BRUKER 1075 CONNECTITE STD PK 5 | EA | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $220.00 | |
| 09234001 | LINER BRUKER 1075 CONNECTITE TOP HOLE PK 1 | EA | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $60.00 | |
| 092340 | LINER BRUKER 1075 CONNECTITE TOP HOLE PK 5 | PK | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $240.00 | |
| 09234101 | LINER BRUKER 1075 CONNECTITE BOT HOLE PK 1 | EA | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $60.00 | |
| 092341 | LINER BRUKER 1075 CONNECTITE BOT HOLE PK 5 | PK | 0 | 0[*L]Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | $240.00 | |
| [*L] Standard lead-time for out-of-stock items is approximately two weeks depending on the item. | ||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||||
![]() Yttria coated filament at start |
![]() Yttria coated filament after 16,000 cycles |
New Pumps Added to the List of LOW COST S.I.S. Rotary Vane
Vacuum Pumps - Save 35 - 50% off the price of comparable vacuum pumps.
Adixen (Alcatel) ACP Series Compact Dry Roughing Pumps - a frictionless pumping module, optimized for operation without internal lubricant.
- Direct Replacement for the Shimadzu QP5000 Filament.
PCI Analytics Products - product solutions for all Analytical Instrumentation
SilTite FingerTite, the next generation GC capillary ferrule system without the use of any tools.
(25% discount until Oct 31)
Direct Replacement for the Heated Capillary in the Thermo-Fisher Scientific TSQ & LCQ Mass Spectrometers now available
- Ideal for use in analytical instrumentation
- Will improve your laboratory workflow and reporting confidence in many ways
DigiVac Bench Top Vacuum Gauges
- Vacuum instrumentation with everything you need to go to work
Imtakt HPLC Columns
-offer a wide variety of unique stationary phases in their HPLC
columns
Programmable syringe pumps for controlled flow. Model NE-300 priced at only $275.00
NEW: Wiley 9th Edition - 660,000-850,000
spectra (a 65% increase).
NEW: Agilent 5973/75 Replacement Source
Heater and Temperature Sensor
NEW: SIS Direct Replacement
Filament for the Amatek/Dycor RGA Leak Detectors and Quadrupoles
(p/n 95381VE), which tests have shown increase service life.
NEW: SIS
Replacement Filter Elements For Edwards Oil Mist Eliminators -
Save up to 25% off the price of comparable Edwards replacement
elements.
Identify mass spectra via library
search with the fully-evaluated, most widely used mass spectral
reference library, compiled by the National Institute of Standards
and Technology (NIST).
View and capture images or video at
20x/400x power on a PC computer via attached USB cable.