B5
Agilent Repair Services by S.I.S.
TM
Scientific Instrument Services, Inc.
TM
FAX: 908-806-6631
www.sisweb.com/catalog/08/B5
Agilent GC Injection Port Repair
The injection port used on the Agilent Technologies GC and GC/MS systems can be repaired. The SS line can become clogged, bro-
ken or the joint can leak. S.I.S. can replace the line with a new 1/16" SS line. If the weld is leaking, but the SS line is fine, then we can
reweld the silver solder joint. All repairs include cleaning and leak testing of the joint.
Agilent 5890/6890 GC Injection Port Repair
B
oth the old style and the new style injection ports from the Agilent Technologies
5970 GC/MS system can be repaired by S.I.S. This injection port is Agilent
#19251-60520. The stainless steel lines often develop leaks where they are
welded to the injection port or the lines can become clogged or kinked. S.I.S. will repair or
replace the lines as required.
Part No.
Description
Reweld S.S. lines
Replace one S.S. line
Replace two S.S. lines
Part No.
Description
Agilent Probe
Agilent DIP Probe Repair
The DIP Probes for the Agilent 5980 mass spectrometers can be repaired by S.I.S.
This repair includes replacing the heater and thermocouple and checking for leaks. The
electrical BNC connector can also be replaced, if necessary.
Part No.
Description
Reweld S.S. line
Replace S.S. line
Agilent 5971 Feedthrough Repair
The feedthroughs on the 5971 analyzer top plate can be replaced by S.I.S. These feedthroughs are
very fragile and susceptible to damage. Repair includes drilling out the old feedthrough, TIG welding a
new feedthrough in place, and helium leak testing of repaired feedthrough. This repair requires returning
the analyzer top plate.
Part No.
Description
Replacement of One Feedthrough
Replacement of Two Feedthroughs
tip...
