MICRO-MESH Abrasive Cloth: Material Safety Data Sheet (MSDS)

SECTION I - PRODUCT IDENTIFICATION

IDENTITY: MICRO-MESH

Manufacturer's Name:                       Emergency Telephone Number:

MICRO-SURFACE FINISHING PRODUCTS, INC. 319-732-3240

1217 West Third Street                     Telephone Number for Information:

Wilton, IA 52778 319-732-3240

Date Prepared: 5/10/90

SECTION II - HAZARDOUS INGREDIENTS

Hazardous Components: NONE

SECTION III - PHYSICAL/CHEMICAL DATA

Boiling Point: N/A

Vapor Pressure (mm Hg.): N/A

Vapor density (AIR=1) N/A

Solubility in Water: N/A

Specific Gravity (H20=1): N/A

Melting Point: N/A

Evaporation Rate (Butyl Acetate-1): N/A

Appearance and Odor: Abrasive Cloth - No Odor

SECTION IV - FIRE AND EXPLOSION HAZARD

Flash Point (Method Used): N/A

Flammable Limits LEL: N/A,          UEL: N/A

Extinguishing Media: Water

Special Fire Fighting Procedures: Standard Fire Fighting Procedures

Unusual Fire and Explosion Hazards: NONE

SECTION V - REACTIVITY DATA

Stability: Stable

Conditions to Avoid:

Incompatibility (Materials to Avoid):

Hazardous Decomposition of Byproducts:

Hazardous Polymerization: Will Not Occur

SECTION VI - HEALTH HAZARD DATA

ROUTE(S) OF ENTRY:

Inhalation: N/A             Skin: N/A               Ingestion: N/A

Health Hazards (Acute and Chronic): N/A

Carcinogenicity: NONE

NIP: N/A                    IARC Monographs: N/A    OSHA Regulated: N/A

Signs and Symptoms of Exposure: N/A

Medical Conditions Generally Aggravated by Exposure: N/A

Emergency and First Aid Procedures: N/A

SECTION VII - SPILL OF LEAK PROCEDURES (SAFE HANDLING)

Steps to be taken in case material is released or spilled: Standard Good Housekeeping Practices

Waste Disposal Method: Accepted Standards of Waste Disposal

Precautions to be taken in handling and storing: Store at Normal Room Temperature

Other Precautions: NONE

SECTION VIII - CONTROL MEASURES

Respiratory Protection: Dust Mask

Ventilation:

Local Exhaust:

Special:

Mechanical (General):

Other: Necessary to Control Dust made by Sanding

Protective Gloves: Recommended

Eye Protection: Recommended

Other Protective Clothing or Equipment: As Required

Work/Hygienic Practices: Standard Good Housekeeping

Contacting our Customer Service Department--comments, questions, or anything can't find?

Call/e-mail/FAX us, or type your comments below.

Name/organization:
Email:		Phone/fax:

Regular business hours are 8:00 AM to 5:30 PM EST, M-F.

E-mail replies are normally expected within one business day.

PHONE: (908)788-5550;   FAX: (908)806-6631;   E-MAIL: WEB: www.sisweb.com
ADDRESS: Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551.