Alcatel and Edwards Replacement Vacuum Pumps for Agilent (HP) Mass Specs
The Alcatel Model UM 2005 vacuum pump can be used on the HP 5970 MSD's.
These two-stage Alcatel vacuum pumps will provide greater pumping efficiency, better vacuum
levels, lower operating temperatures, and greatly increased vacuum
pump life as shown in the table below.
In addition to the Alcatel UM 2005 vacuum pump, larger pumps are
fully described on the Alcatel Vacuum Pump pages of this catalog.
Also listed below are the common fittings to adapt the Alcatel
pump fitting for various size hoses. Additional pump fittings
are listed in the pump fitting section of our catalog.
MSD® is a registered trademark of Agilent.
Vacuum Pump Comparison
| | Alcatel | Edwards | Edwards |
| | UM 2005 | E2M1 | E2M2 |
| Free Air Displacement (cfm) |
3.2 |
1.1 |
1.4 |
| Ultimate Vacuum (m bar) |
1 x 10-4 |
5 x 10-4 |
2.5 x 10-4 |
| Operating Oil Temperature |
50 degrees C |
75 degrees C |
38 degrees C |
| Weight (Kg) |
19 |
10 |
18 |
| Dimensions -L x W x H (cm) |
49 x 14 x 25 |
30 x 12 x 20 |
42 x 16 x 25 |
| Inlet Fitting |
NW25 |
NW10 |
NW25 |
| UM2005 |
Alcatel Vacuum Pump (select 120 or 240 V opperation when ordering), 60 lbs | 3.8 | EA |
45 |
PART NUMBER OUTDATED. New number is
205SDM(#) | --- | --- |
| IN191 |
Inland 19 Pump Oil, 1 Gallon Bottle | --- | GL |
8 |
20 | $19.75(*G) |
|
|
(*_) Marked parts have bulk quantity discount pricing:
Discount code 'G' -- 4 or more: 3% off.
|
|
(#) Standard lead-time for out-of-stock items is approximately two weeks. |
Ordering information.
International (non-US) prices available through your local dealer.
|
|
Long Nipples-Aluminum, For NW Flange=25, A (mm)=35, C (mm)=40, UOM=EA |
| NS25075 |
3/4 | 19.8 |
0.25 |
27 | $34.65 |
|
| NS25050 |
1/2 | 12.3 |
0.25 |
16 | $40.95 |
|
Ordering information.
International (non-US) prices available through your local dealer.
|
| SIS Catalog Cross Reference |
| Page # | Part Numbers |
|---|
|
UM2005 | | F66 |
NS25050, NS25075 | | F19 |
IN191 | | B20 |
IN191 | | B8 |
IN191 |
© 1996-2008 Scientific Instrument Services, Inc.
[Trademarks]
|