Product ID : IN702
IN702 Size=500 mL Invoil 702 IN7021 Size=1 gallon Invoil 702
DescriptionInvoil 702 is designed for the rapid pumping of large volumes of gas. It has the important advantage of thermal stability. The silicone based fluid is resistant to air at operating temperatures, so the pumps require no cooling between cycles.
- Superior Vapor Pressure Capabilities
- Resistant to Oxidation
- Thermal Stability
- Quick Pumpdown Cycles
|Vapor Pressure @ 25 °C||3.3 x 10 -6 torr|
|Boiling Point @.50 torr:||190 °C (374 °F)|
|Viscosity @ 40 °C :||26.8 cst (127.3 SUS)|
|Viscosity @ 100 °C:||6.2 cst (46.5 SUS)|
|Pour Point:||<0 °C (<32 °F)|
|Flash Point:||193 °C (380 °F)|
Mass Spectrometer filaments and heaters can be repaired and restored to a like-new condition at S.I.S.
Fiberglass brushes are manufactured from spun glass in two grades of material - coarse and fine.
The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.
Digivac Vacuum Gauge Model 22W is an ultra compact vacuum transmitter that delivers big results.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
The below listed vacuum flange copper gaskets are made from OFHC copper.
The Desorption Tube Conditioning System is used for the flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.
This 24 tube conditioning oven is used for batch flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
Quality replacement filaments for your Ion Trap mass spectrometer. For Saturn model 2000, 2100, 2200 series