B3
Agilent GC Parts & Repairs
FAX: 908-806-6631
www.sisweb.com/catalog/12/B3
Agilent GC Injection Port Repair
The injection port used on the Agilent Technologies GC and GC/MS systems can
be repaired. The SS line can become clogged, broken or the joint can leak. S.I.S.
can replace the line with a new 1/16" SS line. If the weld is leaking, but the SS line
is fine, then we can reweld the silver solder joint. All repairs include cleaning and
leak testing of the joint.
Agilent 5890/6890 GC Injection Port Repair
B
oth the old style and the new style injection ports from the Agilent
Technologies 5970 GC/MS system can be repaired by S.I.S. This injec-
tion port is Agilent #19251-60520. The stainless steel lines often devel-
op leaks where they are welded to the injection port or the lines can become
clogged or kinked. S.I.S. will repair or replace the lines as required.
Part No.
Description
REP8W
Reweld S.S. lines
REP81
Replace one S.S. line
REP82
Replace two S.S. lines
Part No.
Description
REP85
Reweld S.S. line
REP86
Replace S.S. line
GC Injection Port Liners
The injection port liners for the Agilent 5890 GC are available from S.I.S. for the splitless injector.
O.D. x I.D.
Part No.
GC Model
x Length (mm) Agilent Part. No.
Description
QIPL6
Agilent 5890
6.5 x 1.4 x 79.5
Quartz Liner
GIPL6
Agilent 5890
6.5 x 1.4 x 79.5
18740-80200
Glass Liner
QIPL7
Agilent Splitless Inj. 6.5 x 2.0 x 78.5
Quartz Liner
GIPL7
Agilent Splitless Inj. 6.5 x 2.0 x 78.5
18740-80220
Glass Liner
GIPL8
Agilent Splitless Inj. 6.5 x 4.0 x 78.5
19251-60540
Glass Liner