Beware of recent phishing e-mails. Use our official contact addresses only.
413-284-9975
Adaptas

Prepacked, Conditioned Desorption Tubes

Prepacked, Conditioned Desorption Tubes
Hover over image to zoom

Description

SIS™ Thermal Desorption Tubes can be supplied ready for the collection of samples for subsequent analysis. All packed Thermal Desorption Tubes are Silco™ Coated S.S. tubes. The tubes are then packed with the indicated packing between two quartz wool plugs. The packed tubes are then conditioned by ramping the temperature to 320 °C and holding at this temperature for 4 hours under constant carrier gas flow. The tubes are then cooled, capped and sealed to maintain their state. These tubes are supplied complete with SS caps with PTFE seals.

Part No. Description Stock/
Lead Time
Price
EA
Order
78629350 SILCO COATED TUBE 3.00MM ID; 50MG TENAX TA DISCONTINUED------
786293100 SILCO COATED TUBE 3.00MM ID; 100MG TENAX TA DISCONTINUED------
78629750 SILCO COATED TUBE 3.0MM ID; 50 MG TEXAN GR DISCONTINUED------
786297100 SILCO CATED TUBE 3.0MM ID; 100MG TENAX GR 0Standard lead-time for non-stock items is approximately two weeks depending on the item. $66.00
Qty
786295100 SILCO COATED TUBE 3.0MM ID; 100MG CARBOTRAP DISCONTINUED------
786201100 SILCO COATED TUBE 3.0MM ID; 100 MG CARBOSIEVE SIII DISCONTINUED------
786205100 SILCO COATED TUBE 3.0MM ID; 100MG CARBOXEN 569 DISCONTINUED------
786090100 SILCO COATED TUBE 4.00MM ID; PACKED W/100 MG TENAX TA DISCONTINUED------
786090200 SILCO COATED TUBE 4.00MM ID; PACKED W/200 MG TENAX TA DISCONTINUED------
786096100 SILCO COATED TUBE 4.00MM ID; PACKED W/100MG TENAX GR DISCONTINUED------
786096200 SILCO COATED TUBE 4.00MM ID; PACKED W/200MG TENAX GR DISCONTINUED------
786092100 SILCO COATED TUBE 4.00MM ID; PACKED W/100MG CARBOTRAP DISCONTINUED------
786098100 SILCO COATED TUBE 4.00MM ID; PACKED W/100MG CARBOSIEVE SIII DISCONTINUED------
786103100 SILCO COATED TUBE 4.00MM ID; PACKED W/100MG CARBOXEN 569 DISCONTINUED------
Related Products
  • Short Path Thermal Desorption TubesShort Path Thermal Desorption Tubes
    After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
  • Short Path Thermal Desorption TubesShort Path Thermal Desorption Tubes
    After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
Popular Items also Purchased
  • Purge and Trap Stainless Steel Purge HeadsPurge and Trap Stainless Steel Purge Heads
    The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
  • Thermal Desorption Sample LoaderThermal Desorption Sample Loader
    This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
  • Short Path Thermal Desorption Accessories Supply KitShort Path Thermal Desorption Accessories Supply Kit
    When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
  • Seals for SIS Thermal Desorption TubesSeals for SIS Thermal Desorption Tubes
    Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
  • Needles for the Short Path Thermal Desorption SystemNeedles for the Short Path Thermal Desorption System
    In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
  • SIS Purge and Trap SystemSIS Purge and Trap System
    The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.
  • Short Path Thermal Desorption TubesShort Path Thermal Desorption Tubes
    After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
  • Thermal Desorption Sample Collection SystemThermal Desorption Sample Collection System
    This Sample Collection System permits the purging of volatiles and semi-volatile components present in solid materials and their trapping on Desorption Tubes packed with an adsorbent resin for subsequent analysis by desorption utilizing the Short Path Thermal Desorption System.
  • 24 Tube Conditioning Oven for Thermal Desorption Tubes24 Tube Conditioning Oven for Thermal Desorption Tubes
    This 24 tube conditioning oven is used for batch flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.
  • Thermal Desorption Conditioning Oven - 6 TubeThermal Desorption Conditioning Oven - 6 Tube
    The Desorption Tube Conditioning System is used for the flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.