Product ID : QF50X16
QF50X16 QF to QF Reducers, 304 Stainless, Tube Size=2 x 1/2 and 3/4, A=0.63, F1=2.95, F2=1.18, NW Flange=50 to 16
Granville-Phillips 340 Vacuum Gauge Controller (VGC) measures pressure from less than 1 x 10-9 Torr to atmosphere, utilizing an ionization gauge and two Convectron gauges.
The Granville Philips Convectron Gauge tube used on the 5971 and 5972 mass spectrometers is available from S.I.S. This is a direct replacement for the HP original and screws into the fitting shown above.
For connecting rubber or plastic hose to NW flanges.
Three NW flanges permit the union of several pump lines.
Quick action aluminum clamp with finger closure "T" knob for positive sealing of NW flanges.
Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
Available with Viton® or Buna O-ring, this centering ring complete with O-ring should be used when joining any two NW flanges with a quick flange clamp.
Compression type quick connect with O-ring seal for connecting gauges or tubes to vacuum systems.
This food and beverage grade, crystal clear PVC tubing is reinforced with 110 ton psi steel spring wire.
The finest reusable worm gear clamps made.