Product ID : JC1
JC1 Ceramic Insulator, JEOL Part #=620011351, OD (in)=0.281, ID (in)=0.203, Thickness (in)=0.216
A variety of alumina insulators. Call for custom sizes
Replacement insulators for your JEOL MS.
A wide variety of alumina ceramic washers.
All stopcocks and movable joints in a high vacuum system must be satisfactorily lubricated, yet leak proof.
The following copper and gold plated copper gaskets are available for the vacuum flanges on Thermo/Finnigan mass spectrometers.
S.I.S. carries copper and gold plated copper gaskets for the Varian Saturn.
The below listed vacuum flange copper gaskets are made from OFHC copper.
Platinum Wire is used in many applications including gasket or o-ring fabrication, thermocouples, electrical contacts, and heater coils.
For those users who have their own spotwelder, we offer the platinum wire and ribbon from which you can make your own heater coils or ribbons for the CDS pyroprobe. W214 : Platinum Wire, Diameter (in)=0.014, Diameter (mm)=0.36, (ohms/cm)=0.01045,W215 : Platinum Ribbon, Thickness (in)=0.0005, Width (in)=0.090, Thickness (mm)=0.0127, Width (mm)=2.29, (ohms/cm)=0.03658
All insulators are constructed from high purity alumina ceramic.
The following alumina insulators are currently available for the Thermo instruments.
Stepped insulators made from alumina ceramic.