Product ID : 979402
979402 Tenax-GR[TM], Mesh=60/80, Size (g)=10.0
More details on associated web pages:
- Tenax®-GR Adsorbent Resin for Trapping Volatiles The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.
- Adsorbent Resin for Trapping Volatiles
Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
SIS offers a direct replacement for Agilent p/n G1099-60104. Same performance at a fraction of the cost
In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
These new Low Dead Volume Injection Port Liners have been specifically designed for use with the Scientific Instrument Services Short Path Thermal Desorption System but could also be utilized with other injection systems and techniques.