Product ID : 971110
971110 Model 971 Micro Cryo-Trap, electronics controller, connecting cables, and stainless steel connecting lines, for use with liquid C02
4-in long cryo-trap for cryo-cooling and heating (cryo-focusing) of volatiles and semivolatiles at the head of GC capillary columns.
1-inch micro cryo-traps for cryo-cooling and heating (cryo-focusing) of volatiles and semivolatiles at the head of GC capillary columns.
The Model EO50/60 is a compact, fast warm-up air-cooled diffusion pump supplies complete with high integrity inlet Co-seal, and flange clamping ring. The jet assembly is removeable for easy cleaning.
A complete line of Brass and Stainless Steel Fittings for GC, MS and general laboratory use.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.