Product ID : 783009
783009 Tube Style Purge Head, 0.25in Tube Style, Consists of Purge Head, Needle Adaptor, Swagelok 1/4in to 1/2in Union with Ferrules and 1/16in Cap Plug [order needle and sample tubes separately]
More details on associated web page:
- Purge and Trap System Stainless Steel Purge Heads The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.
Bench top temperature controller that can be utilized to supply the heating and temperature controlling of a variety of laboratory accessories.
The following glassware can be used in conjunction with the S.I.S. purge head adaptor to permit the use of the S.I.S. tube style liquid purge head for purging liquid and solid samples and trapping volatiles purged from the samples onto the S.I.S. Thermal Desorption Tubes.
The stainless steel metal frit spargers have been designed for use with the S.I.S. purge and trap system.
A variety of lengths of the stainless steel sparging needles are available for the S.I.S. Purge & Trap system.