Product ID : 072627
072627 SGE Ferrules, Material=100% graphite, Column Size (I.D.)=0.1-0.32 mm, Hole Size=0.5 mm, Pack of=10
More details on associated web pages:
- Agilent (Hewlett Packard) Part Number Cross Reference Scientific Instrument Services carries a wide selection of parts for all models of Agilent (Hewlett Packard) mass spectrometers. In order to aid you in the selection of replacement parts for your instrument, the following part number cross reference chart can be used. If a part number is not listed, it either means we do not have that part in our inventory or perhaps we are not aware of the Agilent part number in relation to our inventory. If you are looking for a part not listed below, give us...
- SGE Ferrules for GC standard graphite ferrules (for GC applications)
- SGE Ferrules for Thermo & Varian G.C.
- SGE Ferrules for Perkin Elmer & Shimadzu GC
Vespel® ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns.
standard graphite ferrules (for GC applications)
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
Micro-Mesh® Regular Sheets
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
Features: Nonpolar Low bleed MS certified High temperature limits (360/370 °C) Excellent inertness Bonded & cross-linked Solvent rinsable Equivalent to USP Phase G27 Guaranteed