Scientific Instrument Services E-Newsletter

June 2013 SIS Newsletter

SIS will be attending ASMS 2013 in Minneapolis, Minnesota, June 9th -13th. Drop by and visit us. We are in booth 106 and we will be presenting a technical poster. We will also be showcasing parts and supplies for GC,GC/MS, LC, and LC/MS including ion transfer tubes and heated capillaries for Thermo MS instruments which are highlighted below.

In addition David Manura will be available to answer questions and demonstrate the latest features of SIMION ion optics software.

Thermal Desorption

See our latest Thermal Desorption application at the poster session on Thursday (Thp192) �Flavor Profiles of Imported and Domestic Beers over Time by Purge & Trap Thermal Desorption GC/MS�.

SIMION

Design your mass spectrometer or optics with the industry standard charge particle optics software

SIMION continues to be actively developed, with recent areas of advancement including order-of-magnitude accuracy improvement, speed in parallelization, View 3D graphics, more flexible APIs, new Refine capabilities (dielectrics/magnets/poisson/surfaces), and expanding documentation/examples. See SIMION Advances .

We are also promoting our mass spec databases, such as our flagship NIST 11. Existing NIST 11 users can request a free update to the NIST 2012 MS/MS library, also available separately. Wiley recently released new MS libraries for Tandem MS, Registry 10^th, and Drugs 2013.

LC/MS Accessories

Ion Transfer Tubes & Heated Capillaries for Thermo Instruments

Ion Transfer Tube	Heated Capillary

Ion Transfer Tube

This is a direct replacement for the Thermo p/n 97055-20198 ion transfer tube used on the LTQ, LTQFT, LTQFT Ultra, and Orbitrap Mass Spectrometers. The ion transfer tube allows ions from the ESI, APCI, APPI sources to enter the LTQ Linear ion Trap. The LTQ will lose sensitivity over time as contaminates build up inside the tube. It is recommended to replace this guide at least quarterly to insure ultimate instrument sensitivity. Replacement takes only seconds and sensitivity is restored.

Heated Capillary

SIS can now provide a direct replacement for the heated capillary for the Thermo Fisher Scientific TSQ and LCQ Mass Spectrometers. The heated capillaries are available in two inner capillary diameter sizes (0.4 mm ID and 0.5 mm ID).

The main stainless Steel tube is 4.25� long by 0.312� diameter. The inner capillary is heated via a cable heater with a thermocouple to measure the temperature of the capillary. The unit comes complete with a phenolic bushing connector wired with a 7 connector pins and the two external leads with push on connectors.

SIS can also supply the capillary sleeves and capillary mount bushings for the Thermo heated capillary as well as the Kalrez� O-ring. The bushing and sleeves are machined from PEEK material in our machine shop to the correct tolerances to fit the Heated Capillary.

P/N	OEM P/N	Description	Price
SIS20198	97055-20198	Ion transfer tube fits LTQ, LTQFT	$225.00
SIS20606	7005-20606	Ion transfer tube for Velos	$225.00
SIS9700098002	97000-98002	Heated Capillary TSQ (0.4 mm id)	$1400.00
SIS7000598041	70005-98041	Heated Capillary LCQ (0.5 mm id)	$1400.00
SIS7000520224	70005-20224	Sleeve	$29.00
SIS9700020281	97000-20281	Mount Bushing	$29.00
K1094079		Kalrez O-ring	$41.01

NE-300 "Just Infusion"� Syringe Pump

Lowest cost syringe pump on the market just $275!!

Features

Just the features that you want at a rock bottom price

Holds small or big syringes up to 60 mL

Pumps continuously until you stop the pump

Infusion rate can be changed while pumping

Remembers previous settings on power up

Power failure mode allow pump to continue pumping after a reset

Syringe purge mode

Displays total volume dispensed in mL or �L units

Maximum pumping rate of 1500 mL/hr with a 60 mL syringe

Precise reproducible flow rates

Selectable infusion rtes units: mL/hr, �L/hr, mL/min, �L/min

Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately

Infuses Only Does not withdraw, volume target, or have computer interface

� 2013 Scientific Instrument Services. All rights reserved.
Scientific Instrument Services, 1027 Old York Rd, Ringoes, NJ 08551
Phone: 908-788-5550	FAX: 908-806-6631	E-Mail: us@sisweb.com
Unsubscribe from this Newsletter \| www.sisweb.com \| Contact US

Name:		Organization/Country:
Email:		Phone/fax: