908-788-5550

New DCI Probe Tip Design for the VG Mass Spectrometers

VGI DCI Probe Tip - new design
Hover over image to zoom

Description

S.I.S. has redesigned the DCI Probe Tip for VG TRIO 1000 and 2000 instruments. The new design incorporates a Vespel® DCI Probe Tip Base which plugs into the tip of your existing probe. Then the replaceable Probe Tip Filaments are plugged into this new Vespel® Probe Tip Base. Once the Vespel Probe Tip Base is purchased, the cost of repairing or replacing the probe filaments is much less than those available from the manufacturer. This new DCI probe tip was designed for and tested by several of our customers. The DCI filaments performed the same as those originally used but the replacement cost is much less.

Part No. Description Price
EA
Order
VG90 Vespel DCI Probe Tip for VG TRIO 1000, 2000 $495.006 or more: 5% off.
Qty
VG91 DCI Probe Tip filament for VG TRIO 1000 $145.006 or more: 5% off.
Qty
VG92 DCI Probe Tip filament for VG TRIO 2000 $145.006 or more: 5% off.
Qty
FILREP Filament Repair $39.006 or more: 5% off.
Qty
Popular Items also Purchased
  • Filament Repair Services for Mass SpectrometersFilament Repair Services for Mass Spectrometers
    Mass Spectrometer filaments and heaters can be repaired and restored to a like-new condition at S.I.S.
  • Perkin Elmer / Torion / Hitachi Filament RepairPerkin Elmer / Torion / Hitachi Filament Repair
    All RMU filaments and heaters are repairable.
  • SISAlloy® Yttria/Rhenium Alloy MS FilamentsSISAlloy® Yttria/Rhenium Alloy MS Filaments
    SIS introduces their new Yttria Rhenium alloy filament wire. In these studies we have discovered that by alloying Rhenium with a small concentration of Yttria, the crystal structure of the rhenium material was altered, which resulted in a stronger filament that is much less susceptible to warping
  • Long Life Yttria Coated SISAlloy® (Yttria/Rhenium Alloy) Mass Spec FilamentsLong Life Yttria Coated SISAlloy® (Yttria/Rhenium Alloy) Mass Spec Filaments
    SIS can repair your filaments with our non-sagging filament wire (SISAlloy® yttria/rhenium alloy with yttria coating). Users have experienced filament lifetime increases of 2 to 3 times compared to the standard uncoated rhenium filaments.
  • Agilent/HP Filament Repair at SISAgilent/HP Filament Repair at SIS
    We will completely clean the assembly and replace the rhenium filament wire.
  • Siemens/Bruker Filament Repair at SISSiemens/Bruker Filament Repair at SIS
    These instruments, which are used in crystallography, utilize coiled tungsten filaments.
  • Rigaku X-Ray Generator Filament Repair at SISRigaku X-Ray Generator Filament Repair at SIS
    These instruments, which are used in crystallography, utilize coiled tungsten filaments.
  • Thermo/Finnigan MAT Ceramic Cleaning, SandblastingThermo/Finnigan MAT Ceramic Cleaning, Sandblasting
    The insulators are first sandblasted with aluminum oxide, then with glass beads.
  • Thermo/Finnigan TSQ®70, 700 Source HeaterThermo/Finnigan TSQ®70, 700 Source Heater
    The heater source for the Finnigan TSQ70, 700 includes 4 cartridge heaters, ceramic insulators, leads and connectors.
  • Agilent 5970 Entrance Lens RepairAgilent 5970 Entrance Lens Repair
    The spotwelds holding the two parts together can break loose.
  • Agilent Entrance Lens RepairAgilent Entrance Lens Repair
    If the connector pin on the entrance lens becomes damaged, it can be repaired in our shops.