Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- Probes
- ▶
- Probes and Related Supplies for Thermo MSStraight Sample Vials for Thermo/Finnigan MAT (Varian MAT) Flared Pyrex Sample Vials for Thermo/Finnigan and SIS Mass Spec Probes Direct Insertion Probe For Agilent (Hewlett Packard) 5989 Mass Spectrometers DCI/DEP Probe High Temperature Direct Probe Thero/Finnigan MAT 3200 Capillary Probe Tube Springs Thermo/Finnigan MAT TSQ FAB Tips
- ▶
- Flared Pyrex Sample Vials
- ▶
- SIS Flared Vials - 10 mm (This Page)
Hover over image to zoom
Price: 120
Product ID : S17A
S17C pkg of=500 Flared Pyrex Sample Vials for SIS Probe 10 mm S17A pkg of=100 Flared Pyrex Sample Vials for SIS Probe 10 mm S17B pkg of=1000 Flared Pyrex Sample Vials for SIS Probe 10 mm
Description
All vials are made to your specifications. Flared sample vials are supplied in packages of one hundred (100), five hundred (500),or one thousand (1000). Outside and inside dimensions currently available are listed in the Dimensions Available tab. Other dimensions are available on special request.
Vials are constructed of Borosilicate glass (Pyrex). O.D. tolerances are ±0.02 mm (0.001 inch) and length tolerance is ±0.20 mm (0.008 inch). The ends are cut clean and straight. Vials are clean and contamination free.
The S17 Series fit the S.I.S. probes. Vials are constructed of Pyrex type glass.
Dimensions
| S17 Series - SIS Probe Flared Type Sample Vials | |
|---|---|
| O.D. | 1.7 mm |
| I.D. | 0.8 mm |
| Length*. | 10.0 mm |
| Lip | 1.5 mm |
| Flare | 3.0 mm |
Standard Size Straight Sealed Pyrex Sample Vials SIS offers a line of standard sample vials for specific mass spectrometer instruments.- Shimadzu Straight Sealed Pyrex Sample Vials Shimadzu standard size vials.
- VG Straight Sealed Pyrex Sample Vials VG standard size vials.
Direct Probe Sample Vial Blocks The blocks are constructed of solid aluminum to hold heat.
SIS HPP7 Direct Insertion Probe for the Agilent/HP 5973/5975 MSD Direct Probe and Probe Inlet System for the HP 5973/5975 MSD mounts on the GC/MS inlet of the MSD
Direct Insertion Probe for HP MS with Controller A ½ inch probe inlet, provides the user with greater flexibility and much faster ramp rates than the standard HP DIP probe.
Probe Inlet for HP5989 MS with Automatic Stops Eliminates the accidental venting of the mass spectrometer via the probe inlet
Agilent (Hewlett Packard) 5989 Probe Inlet with stops Has been designed to prevent the occasional venting of the mass spectrometer by accidentally pulling the probe past the vacuum seals.
FC-43 (Perfluorotributylamine) Calibration Compound This compound is available in bottles of 35, 100, and 200 grams.
Agilent 5989 Filaments Filaments for your Agilent 5989 mass spectrometer.
GCQ Probe and Probe Inlet GCQ Probe and Probe Inlet
High Temperature Direct Probe for HP and Finnigan MS The probes can be used from ambient temperature up to 800 degrees C with ballistic temperature ramp of over 700 degrees C/min.
Thermo Direct Probe Flared Vials Thermo Direct Probe Flared Vials
Varian Saturn Ion Trap Filaments Quality replacement filaments for your Ion Trap mass spectrometer. For Saturn model 2000, 2100, 2200 series
Nylon Gloves Nylon, lint free, durable, and ambidextrous.