For those users who have their own spotwelder, we offer the platinum wire and ribbon from which you can make your own heater coils or ribbons for the CDS pyroprobe.
|Part No.||Diameter (in)||Diameter (mm)||(ohms/cm)||Thickness (in)||Width (in)||Thickness (mm)||Width (mm)||Stock/
|0.014||0.36||0.01045||---||---||---||---||48 hours*Standard lead time for wire is 48 hours.||$195.00|
|---||---||0.03658||0.0005||0.090||0.0127||2.29||0†Standard lead-time for non-stock items is approximately two weeks depending on the item.||$162.00|
|Unit of measure for ordering is Foot.|
* Standard lead time for wire is 48 hours. |
† Standard lead-time for non-stock items is approximately two weeks depending on the item.
|Ordering information. International (non-US) prices available through your local dealer.|
Platinum Wire is used in many applications including gasket or o-ring fabrication, thermocouples, electrical contacts, and heater coils.
Micro-Mesh® Regular Sheets
Silver wire and ribbon has the highest electrical and thermal conductivity of all metals. It is used to make lead wires for some mass spectrometer filaments and heaters.
Mass Spectrometer filaments and heaters can be repaired and restored to a like-new condition at S.I.S.
GC replacement coils for pyroprobe.
Are available in both quartz and ceramic.
The tubes are constructed of a pure 99% alumina ceramic that has superior gas and vacuum tightness and excellent insulating properties even at elevated temperatures.
All stopcocks and movable joints in a high vacuum system must be satisfactorily lubricated, yet leak proof.
Rhenium/Tungsten Wire and Ribbon is used in the manufacture of mass spectrometer filaments and heater coil as well as in the manufacture of thermocouples.